Tag: M.W:600-700

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Take Grubbs-HoveydaII catalyst (464.0mg, 0.74mmol),Compound II (201.0 mg, 0.9 mmol,) prepared in Example 1 was placed in a 25 mL round bottom flask.Add 15 mL of dry THF and stir at 800 r / min at room temperature for 30 min.After the reaction was completed, the solvent was dried with a vacuum pump to obtain a brown-red solid.Add n-hexane to the solid and stir thoroughly. At this time, the color of n-hexane will turn red. Centrifuge the mixture, discard the liquid, and dry the solid.Compound III (385 mg, yield: 70.6%) was obtained as a brown solid powder.

The chemical industry reduces the impact on the environment during synthesis,301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Jilin Chemical College; Yu Xiaobo; Geng Shudong; Liu Guanchen; (14 pag.)CN110563769; (2019); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

HII 65 HII (200mg) and P(0’Pr)3 (5eq) were stirred in for 72h. The crude 65 was recrystallised from DCM/pentane. (400MHz, 298K): 16.05 (d, 1 H, J = 35.3 Hz, C=CH), 10.24 (d, 1 H, J = 9.7 Hz, Ph-H), 6.87-6.83 (m, 2H, Ph-H), 6.78 (s, 1 H, Ph-H), 6.61 (s, 1 H, Ph-H), 6.19-6.16 (m, 2H, Ph- H), 4.67 (brs, 2H, PO-CH-CH3), 4.09-4.06 (m, 1 H, Ph-0-CH-CH3), 4.04 (brs, 1 H, PO- CH-CH3), 3.43-3.40 (m, 1 H), 3.16-3.02 (m, 3H), 2.89 (s, 3H, Mes-CH3), 2.58 (s, 3H, CH3), 2.46 (s, 3H, CH3), 2.42 (s, 3H, CH3), 2.18 (s, 3H, CH3), 1.92 (s, 3H, CH3), 1.48- 0.80 (m, 24H, PO-CH-CH3).31P{1H} (121.49MHz, 298K): 128.7 (s)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, 301224-40-8

Reference£º
Patent; UNIVERSITY COURT OF THE UNIVERSITY OF ST ANDREWS; CAZIN, Catherine; WO2011/117571; (2011); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Hoveyda-Grubbs 2nd generation catalyst (19mg; 0.03mmol) was added to a solution of dien 7 (100mg; 0.31mmol) and styrene (2.48mmol) in dichloroethane (5mL). The reaction mixture was heated at 80C for 5h. Then, another portion of H-G catalyst (19mg; 0.03mmol) was added and the reaction mixture was heated at 80C for additional 5h. Then, the solvent was evaporated and crude solid was purified by column chromatography on silica gel (mobile phase – 3% ethyl acetate in cyclohexane, Rf of products 0.18-0.25). In some cases, stated in each experiment, HPLC had to be used due to very close retention time of product and starting material (mobile phase – 0.5% ethyl acetate in cyclohexane).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, 301224-40-8

Reference£º
Article; Korinkova, Petra; Bazgier, Vaclav; Oklestkova, Jana; Rarova, Lucie; Strnad, Miroslav; Kvasnica, Miroslav; Steroids; vol. 127; (2017); p. 46 – 55;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a glove box, a flask was charged with Ru complex 4 or 5 and Ag salt 3. Anhydrous degassed CH2Cl2 was then added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off through a Celite layer and washed with anhydrous (2mL). The solution was diluted with anhydrous hexane (10mL) and remaining precipitated Ag salt was again filtered off. Evaporation of the solvents on a rotary vacuum evaporator (40C, 1h, 25kPa) and finally at oil pump vacuum (25C, 1h, 1kPa) gave the products 1 or 2. 4.8 [1,3-Bis(2,4,6-trimethylphenyl)imidazolidin-2-ylidene](2-isopropoxybenzylidene)-bis[perfluoro(2-methyl-3-oxahexanoyl)oxy]ruthenium(IV)(1a) (0038) According to the general procedure, silver salt 3a (20mg, 0.047mmol) and complex 4 (HG2, 11.6mg, 0.019mmol) gave the target complex 1a (22mg, 98%, deep violet crystals). 1H NMR (399,94MHz, CD2Cl2): delta 0.95+0.97+0.97 (3¡Ád, 3JH-H=5.9Hz, 6H, OCH(CH3)2), 2.06 (m, 6H, Ar’CH3-p), 2.43 (m, 12H, Ar’CH3-o), 4.09+4.11+4.12 (3¡Ás, 4H, CH2), 4.46 (m, 1H, OCH(CH3)2), 6.63 (m, 1H, ArH), 6.96 (m, 1H, ArH), 7.11 (dd, 3JH-H=7.6Hz, 4JH-H=1.5Hz, 1H, ArH), 7.19 (m, 4H, Ar’H), 7.37 (m, 1H, ArH), 17.58+17.63+17.68 (3¡Ábs, 1H, Ru=CH)ppm. 19F NMR (376.29MHz, CD2Cl2): delta -80.7+(-81.2) (2¡Ádm, 2JF-F=150Hz, 1F, CFFCF2CF3), -81.2+(-81.3)+(-81.6)+(-81.8) (4¡Ám, 4JF-F=13Hz, 3F, CF3CF), -81.5+(-81.7)+(-81.7) (4¡Át, 4JF-F=10Hz, 3F, CF3CF2), -83.5+(-83.6)+(84.4)+(-84.6) (4¡Ádm, 2JF-F=150Hz, 1F, CFFCF2CF3), -128.4+(-128.9) (2¡Ám, 1F, CF3CF), -129.9+(-130.2)+(-130.3) (3¡Ám, 2F, CF3CF2) ppm, 13C NMR (100.58MHz, CD2Cl2): delta 17.0 (m, 4C, Ar’CH3-o), 18.3 (m, 2C, Ar’CH3-p), 19.8+19.9+20.8 (3¡Ás, 2C, OCH(CH3)2), 50.1 (s, 2C, CH2N), 75.0+75.1+75.2 (3¡Ás, 1C, OCH(CH3)2), 106-120 (m, 22C, CF3, CF2, CF), 110.8+111.1+111.3 (3¡Ás, 1C, CArHCArOiPr), 122.2+122.3+122.3 (3¡Ás, 1C, CArH), 123.7+123.8+123.9 (3¡Ás, 1C, CArH), 129.5 (m, 4C, CArH), 130.1+130.2+130.3 (3¡Ás, 1C, CArH), 136.5+137.2+137.4 (3¡Ám, 2C, CAr’CH3), 139.0+140.2+140.7 (3¡Ám, 4C, o-CAr’CH3), 142.6+142.8+143.0 (3¡Ás, 1C, CArCH=Ru), 153.5 (s, 1C, CAr-OiPr), 159.2+159.4+162.8 (3¡Ád, 2JC-F=25Hz, 1C, COO), 209.1+209.3+209.6 (3¡Ás, 1C, NCN), 319.4 (m, CH=Ru)ppm. MS (ESI+) m/z (%): 929.2 [M+Na]+ (100), 731.2 (59), 441.3 (88). HRMS (ESI+): [M+Na]+ calcd. for C39H44F8N2NaO7Ru 929.1956, found 929.1965.

The chemical industry reduces the impact on the environment during synthesis,301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Lipovska, Pavlina; Rathouska, Lucie; ?im?nek, Ond?ej; Ho?ek, Jan; Kola?ikova, Viola; Ryba?kova, Marketa; Cva?ka, Josef; Svoboda, Martin; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 191; (2016); p. 14 – 22;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is Dichloro(2-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium (II), as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 203714-71-0, its synthesis route is as follows.

In a glove box, NHC ligand precursor 23 (63 mg, .13, mmol), ruthenium precursor 11 (78 mg, .13 mmol) and KOMJu(Fe) (29 mg, .13 mmol) were combined in toluene. The flask was sealed, removed from the glove box and stirred at 60 0C for 18 hours. The reaction was concentrated and purified by flash column chromatography (5% –> 20% Et2O/Pent). There were 3 bands that could be isolated from this column, first 2 brown bands and then one green band. The second brown band was the desired product; however, it was not completely pure after one column. Recolumning in 10% Et2O/Pentane gave a brown oil product completely pure by 1H NMR (9 mg, 9%) and another fraction still slightly impure (18 mg, 18%). The products were lyophilized from benzene to give solids. 1H NMR (300 MHz, CDCl3) delta 16.78 (s, IH), 8.13 (br, 2H), 7.74-7.62 (m, 4H), 7.07-7.04 (m, IH), 6.97 (dd, J = 3, 1.5 Hz, IH), 6.66 (t, J = 7.5 Hz, 3H), 6.34 (d, J = 8.4 Hz, IH), 4.49 (sept, J = 6 Hz, IH), 1..44 (d, J = 6 Hz, 6H), 1.44 (br, 18H), 1.18 (br, 18H); 13C (75 MHz, CDCl3) delta; HRMS (EI+) calc for C4IH56Cl2N2ORu, 764.2814. Found 764.2842.

203714-71-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,203714-71-0 ,Dichloro(2-isopropoxyphenylmethylene)(tricyclohexylphosphine)ruthenium (II), other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MATERIA, INC.; CALIFORNIA INSTITUTE OF TECHNOLOGY; WO2007/75427; (2007); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a glove box, a flask was charged with Ru complex 4 or 5 and Ag salt 3. Anhydrous degassed CH2Cl2 was then added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off through a Celite layer and washed with anhydrous (2mL). The solution was diluted with anhydrous hexane (10mL) and remaining precipitated Ag salt was again filtered off. Evaporation of the solvents on a rotary vacuum evaporator (40C, 1h, 25kPa) and finally at oil pump vacuum (25C, 1h, 1kPa) gave the products 1 or 2.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, 301224-40-8

Reference£º
Article; Lipovska, Pavlina; Rathouska, Lucie; ?im?nek, Ond?ej; Ho?ek, Jan; Kola?ikova, Viola; Ryba?kova, Marketa; Cva?ka, Josef; Svoboda, Martin; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 191; (2016); p. 14 – 22;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

Complex 16 (125 mg, 0.200 mmol, which was prepared from Hoveyda-Grubbs first generation catalyst 15according to literature procedure (31), was dissolved in THF (4 ml) and potassium 2,4,6-triphenylthiophenolate 2a (78mg 0.200 mmol) was added as a solid in small portions. Residual reactant was transferred into the reaction mixture asa solution/suspension in THF (1 ml). The mixture was stirred for 4 h before all volatiles were removed under reducedpressure. The solid green residue was extracted with toluene (4×1 ml), and the green solution filtered and dried in vacuumleaving a green solid 208 mg). 1H-NMR showed the presence of toluene that could not be removed in vacuum. Thereforethe target compound was treated repeatedly with DCM/pentane followed by drying in vacuum, reducing the mass to0.185 mg. The residual was dissolved in 0.5 mL CH2Cl2, and then pentane (10 ml) was slowly added, in such a way asto obtain two separate layers, which were allowed to diffuse slowly (one week) into each other at -32C. The dark greencrystals of 7a?CH2Cl2?C5H12 were isolated and washed three times with pentane (145 mg, yield = 67 %). 1H NMR(500.13 MHz, CD2Cl2): delta = 14.47 (s, 1 H, Ru=CH), 7.67-7.60 (m, 2 H), 7.58-7.51 (m, 2 H), 7.44-7.40 (m, 2 H), 7.36-7.29(m, 3 H), 7.27-7.21 (m, 1 H), 7.17 (br, 1H), 7.05 (t, J = 7.2 Hz, 1 H), 6.97 (br, 2H), 6.94 (s, 2H), 6.91-6.73 (m, 8 H), 6.59(dd, J = 7.6, 1.5 Hz, 1 H), 6.50 (d, J = 8.3, 1 H), 4.27 (sep, J = 6.1 Hz, 1H), 2.42 (s, 6H), 2.15 (s, 6H), 2.04 (s, 6H), 1.07(d, J = 6.1 Hz), 0.66 (d, J = 6.1 Hz). 13C{1H} NMR (150.90 MHz, CD2Cl): delta= 272.40, 176.26, 153.78, 149,54, 147,54,146,79, 145.14, 142.86, 141.82, 141.13, 138.99, 137.91, 137.49, 137.15, 136.64, 131.23, 130.29, 130.22, 129.65,129.39, 129,35, 129,28, 129.16, 129.05, 128.99, 128.84, 128.73, 128.58, 128.43, 128.31, 127.89, 127.68, 127.52,127.43, 127.26, 127.01, 126.89, 125.79, 125.66, 125.23, 122.58, 122.58, 121.94, 113.47, 76.26, 51.98, 21.65, 21.30,20.92, 19.60, 18.86. HRMS (DART), m/z: 928.26871 [M+H]+, calculated for C55H5437CIN2OS101Ru: 928.26717.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, 301224-40-8

Reference£º
Patent; Bergen Teknologioverf¡ãring AS; Jensen, Vidar Remi; Occhipinti, Giovanni; EP2826783; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, and cas is 301224-40-8, its synthesis route is as follows.

General procedure: A mixture of fluorinated acid silver salt 6 (2.2eq.) and dichlororuthenium(IV) complex 5 (1.0eq.) was first dried under vacuum (13Pa) at room temperature for 1h. Dry dichloromethane (5mL) was added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off and washed with dry dichloromethane (2mL). Evaporation of the solvent afforded the product 7-9.

301224-40-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,301224-40-8 ,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Babun?k, Mario; ?im?nek, Ond?ej; Ho?ek, Jan; Ryba?kova, Marketa; Cva?ka, Josef; B?ezinova, Anna; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 161; (2014); p. 66 – 75;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

301224-40-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, cas is 301224-40-8,the ruthenium-catalysts compound, it is a common compound, a new synthetic route is introduced below.

A further example of a synthesis producing an NHC containing cis complex is shown below. [0088] HII (200 mg) and P(OiPr)3 (5 eq) were stirred in for 72 h. The crude 65 was recrystallised from DCM/pentane. [0089] 1H (400 MHz, 298K): 16.05 (d, 1H, J=35.3 Hz, C?CH), 10.24 (d, 1H, J=9.7 Hz, Ph-H), 6.87-6.83 (m, 2H, Ph-H), 6.78 (s, 1H, Ph-H), 6.61 (s, 1H, Ph-H), 6.19-6.16 (m, 2H, Ph-H), 4.67 (brs, 2H, PO-CH-CH3), 4.09-4.06 (m, 1H, Ph-O-CH-CH3), 4.04 (brs, 1H, PO-CH-CH3), 3.43-3.40 (m, 1H), 3.16-3.02 (m, 3H), 2.89 (s, 3H, Mes-CH3), 2.58 (s, 3H, CH3), 2.46 (s, 3H, CH3), 2.42 (s, 3H, CH3), 2.18 (s, 3H, CH3), 1.92 (s, 3H, CH3), 1.48-0.80 (m, 24H, PO-CH-CH3). [0090] 31P{1H} (121.49 MHz, 298K): 128.7 (s)

The chemical industry reduces the impact on the environment during synthesis,301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; University Court of the University of St. Andrews; Cazin, Catherine; US2014/228563; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 301224-40-8, its synthesis route is as follows.

General procedure: A mixture of fluorinated acid silver salt 6 (2.2eq.) and dichlororuthenium(IV) complex 5 (1.0eq.) was first dried under vacuum (13Pa) at room temperature for 1h. Dry dichloromethane (5mL) was added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off and washed with dry dichloromethane (2mL). Evaporation of the solvent afforded the product 7-9.

301224-40-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,301224-40-8 ,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Babun?k, Mario; ?im?nek, Ond?ej; Ho?ek, Jan; Ryba?kova, Marketa; Cva?ka, Josef; B?ezinova, Anna; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 161; (2014); p. 66 – 75;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI