Category: 246047-72-3

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

A suspension of 1.00 g (1.19 mmol) of [RuCl2(PCy3)(ImH2Mes)(phenylmethylene)] (commercially available from Sigma- Aldrich Inc., St. Louis, USA), 0.15 g (1.47 mmol) of copper chloride and 0.30 g (1.47 mmol) of 2-[((?,Z)-2-propenyl)-phenoxy]-propionarnide as a 3.5:1 mixture of E/Z-isomers in 75 ml of dichloromethane was stirred for 30 min at 400C. The reaction mixture was evaporated to dryness at 40C/10 mbar. The crude title product was dissolved in 100 ml of ethyl acetate and the formed suspension filtered. The filtrate was evaporated to dryness at 40 C/10 mbar. The crude title product was purified by repeated digestion with pentane / THF to yield 0.41 g (53%) of the title compound as a green solid.MS: 655.1 (M+). Anal, calcd. for C3IH37Cl2N3O2Ru: C, 56.79; H, 5.69; N, 6.41; Cl, 10.81. Found: C, 56.23; H, 5.59; N, 6.16; Cl, 10.84.Crystals of the title compound suitable for X-ray crystal structure analysis were grown by vapor diffusion of pentane into a solution of 10 mg of [RuCl2(=CH(o-OCH(Me)CONH2) Ph)(ImH2MeS)] in 0.5 ml of tetrahydrofuran at room temperature.Fig. 3 shows a labeled view of the complex of formula E.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2009/124853; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

246047-72-3, General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid., 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

After a 50 mL two-necked flask was purged with argon, ligand 5c (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a yellow-green solid product 6c in a yield of 96%.

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

Example 5 Synthesis of the Complex 4 According to the Invention [0081] The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (78 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40 C. for 1 hour. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol. %). After evaporating the solvents, the complex 4 was obtained as a brown solid (104 mg, 50% yield). [0082] 1H NMR (500 MHz, CD2Cl2) delta ppm: 16.42 (s, 1H), 8.00 (dd, J=9.3, 2.7 Hz, 1H), 7.53 (d, J=2.7 Hz, 1H), 7.12 (s, 1H), 7.06 (s, 2H), 6.69 (d, J=9.3 Hz, 1H), 6.22 (s, 1H), 4.07-4.03 (m, 1H), 3.88-3.77 (m, 2H), 3.73-3.67 (m, 1H), 2.64 (s, 3H), 2.56 (s, 3H), 2.51 (s, 3H), 2.39 (s, 3H), 2.27 (s, 3H), 1.64-1.50 (m, 13H), 1.46 (m, 3H), 1.12-0.75 (m, 20H). 13C NMR: (125 MHz, CD2Cl2) delta ppm: 282.23 (d), 220.27, 219.73, 184.63 (d), 145.82, 139.23 (d), 139.08, 138.89, 137.46, 136.76, 136.69, 134.24, 134.00, 130.55, 130.36, 129.41 (d), 125.78, 117.59, 115.27, 52.14 (d), 51.63 (d), 34.52, 32.77, 32.64, 29.40, 28.91, 28.00 (m), 26.90 (d), 22.73, 21.34, 21.01, 19.41, 18.63, 18.53, 17.10, 14.21.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Skowerski, Krzysztof; Bieniek, Michal; US2015/158896; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

After a 50 mL two-necked flask was purged with argon, 3 g (10 mmol) of ligand, CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a green solid product 4cs in a yield of 82%.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

Example 3 SYNTHESIS OF THE COMPLEX 3 ACCORDING TO THE INVENTION [0078] The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (63 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40 C. for 5 hours. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol. %). After evaporating the solvents, the complex 3 was obtained as a green solid (140 mg, 72% yield). [0079] 1H NMR (500 MHz, CD2Cl2) delta ppm: 15.85 (s, 1H), 7.07 (s, 1H), 7.00-6.96 (m, 3H), 6.66 (d, J=8.4 Hz, 1H), 6.44 (dd, J=7.7, 1.4 Hz, 1H), 6.24 (s, 1H), 6.20 (t, J=7.2 Hz, 1H), 4.01-3.96 (m, 1H), 3.83-3.70 (m, 2H), 3.64-3.59 (m, 1H), 2.63 (s, 3H), 2.54 (s, 3H), 2.50 (s, 3H), 2.35 (s, 3H), 2.27 (s, 3H), 1.66-1.50 (m, 13H), 1.29 (s, 3H), 1.11-0.70 (m, 20H). 13C NMR: (125 MHz, CD2Cl2) delta ppm: 281.36, 222.21, 221.66, 180.31, 148.30, 139.54, 139.17, 138.78, 137.63, 137.32, 136.98, 134.69, 130.23, 130.05, 129.70, 129.00, 122.38, 116.17, 111.26, 32.52, 32.39, 29.45, 28.92, 28.23, 28.15, 28.12, 28.04, 27.34, 27.03, 21.33, 21.14, 19.40, 18.92, 18.66, 16.76. 31P NMR (124.5 MHz, CDCl3) delta ppm: 29.11., 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Patent; Skowerski, Krzysztof; Bieniek, Michal; US2015/158896; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,cas is 246047-72-3, mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

The catalyst precursor 620g and alkenyl ligands340g was added to a 10L reactor was added dichloromethane solvent 5L, cuprous chloride was added 150g, it was heated under nitrogen at 30 until starting material disappeared the reaction was cooled to room temperature, filtered impurities.The filtrate was distilled off under reduced pressure and toluene was added 100mL of methylene chloride and methanol to precipitate the product catalyst 5L solid was filtered and dried to give the final catalyst 330g, 65% yield.

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; Shanghai Keqin Technology Co., Ltd.; Zhang Wei; Wu Jiang; Zhu Chunyin; (26 pag.)CN106939026; (2017); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,cas is 246047-72-3, mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 18 (10.5 g, 22.4 mmol) in THF (120 mL) was added TBAF (1.0 mol/L in THF, 90 mL, 90 mmol) at 20 C, and the mixture was stirred for 5 h. Then, the mixture was concentrated under reduced pressure, and the residue was purified by recrystallization (PhH + H2O) to give 19 (7.50 g, 21.2 mmol, 95%) as a colorless needle. 19: mp 217e219 C; [a]D24 39.7 (c 0.0350, CHCl3); IR (KBr) n 3484, 3054, 3026, 2891, 1436, 1380, 1265, 1103, 1031, 861, 828, 801, 744, 678, 549, 476 cm1; 1H NMR (400 MHz, CDCl3) d 2.36e2.45 (1H, m), 2.66 (1H, ddd, J 3.6, 8.3, 15.9 Hz), 2.80 (1H, s), 3.34 (1H, t, J 8.5 Hz), 3.39 (1H, ddd, J 4.0, 9.7, 19.4 Hz), 3.53 (1H, dt, J 5.2, 9.7 Hz), 3.65 (1H, t, J 9.3 Hz), 3.77 (1H, t, J 10.5 Hz), 3.89 (1H, t, J 8.8 Hz), 4.07 (1H, brqd, J 2.9, 15.3 Hz), 4.35e4.40 (2H, m), 5.73(1H, s), 5.82e5.88 (1H, m), 5.92e5.98 (1H, m), 7.46e7.50 (2H, m), 7.62 (1H, d, J 8.5 Hz), 7.82e7.88 (3H, m), 7.99 (1H, s); 13C NMR (100 MHz, CDCl3) d 34.3 (CH2), 68.5 (CH2), 68.9 (CH2), 69.9 (CH), 73.6 (CH), 76.4 (CH), 80.9 (CH), 87.8 (CH), 101.9 (CH), 123.8 (CH), 125.8 (CH), 126.1 (CH), 126.4 (CH), 127.3 (CH), 127.7 (CH), 128.2 (CH),128.4 (CH), 131.7 (CH), 132.9 (C), 133.7 (C), 134.4 (C); EI-HRMS (m/z) calcd for C21H22O5 [M]: 354.1467, found: 354.1464.

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Article; Sato, Takuto; Nogoshi, Keisuke; Goto, Akiyoshi; Domon, Daisuke; Kawamura, Natsumi; Nomura, Yoshitaka; Sato, Daisuke; Tanaka, Hideki; Murai, Akio; Katoono, Ryo; Kawai, Hidetoshi; Suzuki, Takanori; Fujiwara, Kenshu; Kondo, Yoshihiko; Akiba, Uichi; Tetrahedron; vol. 73; 6; (2017); p. 703 – 726;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI