Category: 22766-68-3

Ethyl quinuclidine-4-carboxylate, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

1-Azabicyclo[2.2.2]oct-4-yl(diphenyl)methanol A solution of phenyllithium (1.5-1.7 M in 70 cyclohexane/30 ether, 20.0 mL, 32 mmol) was chilled down to -30 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (1.51 g, 8.23 mmol) in THF (20 mL) was slowly added to the reaction mixture at -30 C. over 25 min. The reaction was allowed to warm up to room temperature over 16 h. The reaction was quenched with H2O and then evaporated to dryness under vacuum. H2O and EtOAc were added, causing a white solid to crash out. This solid was filtered off, to give the title compound (0.79 g). The aqueous phase was further extracted with EtOAc, the combined organic layers were dried over MgSO4, filtered, and concentrated under vacuum. The crude product was treated with EtOAc and hexane and filtered to yield more of the title compound (0.67 g). Total yield (1.46 g, 60.7%). EI-MS m/z 294(M+H+) Rt (1.37 min).

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

22766-68-3, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

Example 33 Preparation of 1-azabicyclo[2.2.2]oct-4-yl(di-3-thienyl)methanol A solution of t-Butyl lithium (1.7M in pentanes, 5.8 mL, 9.86 mmol) was chilled to -78 C. under Ar. 3-Bromothiophene (0.46 mL, 4.90 mmol) dissolved in THF (4.0 mL) was slowly added to the reaction mixture over 6 min. The reaction was stirred for 30 min and then ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.3132 g, 1.71 mmol) in THF (4 mL) was added. The reaction was allowed to warm up from -78 C. to room temperature over 16 h. After 14 hours, the reaction was slowly quenched with water. EtOAc was added, causing a grey solid to crash out. The solid was filtered off to give the title compound (0.3375 g, 64.6%). EI-MS m/z 306(M+H)+ Rt (1.27 min).

The chemical industry reduces the impact on the environment during synthesis, 22766-68-3, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.22766-68-3, Ethyl quinuclidine-4-carboxylate it is a common compound, a new synthetic route is introduced below.22766-68-3

Step 1. A solution of 4-carbethoxyquinuclidine (10.92 g) in THF (155 mL) was treated at-780C with borane-THF (1.0 M, 77.5 mL). The resulting mixture was stirred at -78C for 4 h, then treated with water (50 mL), warmed to room temperature and stirred for an additional hour. The reaction mixture was diluted with ethyl acetate and the aqueous phase was separated and extracted with two further portions of ethyl acetate. The combined organic layers were washed with brine- (twice), dried (MgSO4), filtered and evaporated in vacuo. Purification by silica gel chromatography (eluting with cyclohexane-ethyl acetate [1 :0 to 1 :1]) gave 1-boranyl-1-aza-bicyclo[2.2.2]octane-4- carboxylic acid ethyl ester (7.12 g, 61%) as an off-white solid. 1H NMR (400 MHz, CDCI3) delta 4.16 (2H1 q, J = 6.9), 3.10-3.05 (6H1 m), 1.98-1.93 (6H, m), 1.26 (3H, t, J = 6.9).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Ethyl quinuclidine-4-carboxylate reaction routes.

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2008/99186; (2008); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Ethyl quinuclidine-4-carboxylate, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

A solution of phenyllithium (1 .9 M in 70 cyclohexane/30 ether, 22.30 mL, 42.40 mmol) was cooled down to -30C under nitrogen. A solution of ethyl 1 -azabicyclo[2.2.2]octane-4-carboxylate (III, 2.0 g, 10.90 mmol) in THF (27.0 mL) was slowly added to the reaction mixture at -30C over 25 mins. The reaction mixture was allowed to warm up to room temperature over 16h. The reaction was quenched with water (10.0 mL) and then evaporated to dryness under vacuum. Water (40.0 mL) and ethyl acetate (40.0 mL) were added, causing a white solid to crash out. This solid was filtered off under vacuum, to give a white powder (2.46 g, 76.8%). 1 -azabicyclo[2.2.2]oct-4-yl(diphenyl)methanol (IV): ^H-NMR (300 MHz, CDC ) delta 7.54 – 7.51 (m, 3H), 7.33 – 7.20 (m, 6H), 2.85 – 2.80 (m, 6H), 1 .78 – 1.72 (m, 6H). MS (ESI) m/z calcd for C20H23NO: 293, found 294 [M + H]+.

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; HOVIONE SCIENTIA LIMITED; TURNER, Craig; LOURENCO, Nuno Torres; SOBRAL, Luis; ANTUNES, Rafael; SANTOS, Maria; ESPADINHA, Margarida; (35 pag.)WO2018/87561; (2018); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

As a common heterocyclic compound, it belongs to quinuclidine compound, name is Ethyl quinuclidine-4-carboxylate, and cas is 22766-68-3, its synthesis route is as follows.

Ethyl quinuclidine-4-carboxylate (900 mg, 4.91 mmol) was hydrolyzed in a mixture of ethanol (2 mL) and sodium hydroxide (aq) (2M, 7.5 mL) at 50 C. The reaction was followed by TLC (methanol/diethylamine 20/1). After 3 hours the mixture was neutralized with HC1 (2 M) to pH=5 and evaporated. The residue was extracted with methanol which however also extracted NaCl. The extract was evaporated and the solid was extracted with ethanol which was not very effective in extracting the desired zwitterionic amino acid. All extracts and solids were combined and HC1 (2 M) was added to pH< 1 and the mixture was evaporated until it was completely dry. The solid residue was suspended in dichioromethane (10 mL) and oxalyl chloride (25 mmol, 2.3 mL) was added followed by two drops of N,N-dimethylformamide. The mixture was refluxed for 6 hours and then evaporated to dryness. To the residue was added N,N-dimethylformamide (10 mL) and sodium azide (10.4 mmol, 680 mg) and the mixture was stirred at 50 C for 20 h, then partitioned between saturated sodium carbonate and toluene. A three phase liquid system was formed. The toluene phase (on top) was collected, dried, and heated at reflux for 1 hours (visible gas formation occurred before reaching the reflux temperature), then cooled and extracted three times with HC1 (SM, 3 x 20 mL). The aqueous phases were combined and heated at reflux for 1 h, then evaporated to almost dryness and triturated with abs. ethanol. The precipitate was collected and gave the desired 4-aminoquinuclidine as the dihydrochloride (173 mg, 0.87 mmol, 18% yield). ?H NMR (400 MHz, deuterium oxide) 3.68- 3.52 (m, 4H), 2.37-2.23 (m, 4H). 22766-68-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,22766-68-3 ,Ethyl quinuclidine-4-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; ACADIA PHARMACEUTICALS INC.; BURSTEIN, Ethan, S.; OLSSON, Roger; JANSSON, Karl, Erik; SKOeLD, Niklas, Patrik; WAHLSTROeM, Larisa, Yudina; VON WACHENFELDT, Henrik; BERGNER, Magnus, Gustav Wilhelm; DREISCH, Klaus; POPOV, Kyrylo; KOVALENKO, Oleksnadr; KLINGSTEDT, Per Tomas; (357 pag.)WO2019/40106; (2019); A2;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

As a common heterocyclic compound, it belongs to quinuclidine compound, name is Ethyl quinuclidine-4-carboxylate, and cas is 22766-68-3, its synthesis route is as follows.

1-azabicyclo[2.2.2]oct-4-yl]bis(4-fluorophenyl)]methanol A solution of 4-fluorophenylmagnesiumbromide (1.0 M in THF, 4.4 mL, 4.4 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1973 g, 1.08 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.3152 g, 88.9%). EI-MS m/z 330(M+H+) Rt (1.65 min).

22766-68-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,22766-68-3 ,Ethyl quinuclidine-4-carboxylate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider