Day: October 13, 2020

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

2-Chloro-benzoic acid (55mg, 0.35mmol) in dry THF was treated with triethylamine (0.20mL) and the mixture was stirred at ambient temperature for 1h. [RuCl2(PPh3)3] (335mg, 0.35mmol) was added and the reaction mixture was stirred overnight at room temperature, during which there was a color change from brown to deep green. The solvent was removed under reduced pressure. The residue was washed with diethyl ether and hexane. Recrystallization from CH2Cl2/Et2O afforded deep green crystals of 2 in five days. Yield: 206mg, 69% (based on Ru). IR (KBr disc, cm-1): nu(OCO) 1511 (s) and 1468 (s). MS (FAB): m/z=852 [M]+, 817 [M-Cl]+, 782 [M-2Cl]+. mueff=1.96muB. Anal. for C40H35O2Cl2P2Ru: calcd. C 60.61, H 4.22%; found C 60.47, H 4.16%.

15529-49-4 is used more and more widely, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Gu, Jiling; Shi, Li-Miao; Ma, Xiu-Fang; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 466; (2017); p. 382 – 388;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 246047-72-3, its synthesis route is as follows.,246047-72-3

After a 50 mL two-necked flask was purged with argon, the ligand 3 cp (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After completion of the reaction, silica gel was added to the filtrate after filtration, and the crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a green solid product 4cp, yield: 68%.

With the complex challenges of chemical substances, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Name is Dichlorotris(triphenylphosphino)ruthenium (II), as a common heterocyclic compound, it belongs to ruthenium-catalysts compound, and cas is 15529-49-4, its synthesis route is as follows.,15529-49-4

To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru). leff = 1.98 lB. IR (KBr disc, cm1):1599 (mCN), 1317 (mCAO), 1432, 1085 and 690 (mPPh3). MS (FAB):m/z 665 [M+], 630 [M+Cl], 403 [M+PPh3], 368 [Ru(salen-en)]+.Anal. Calc. for C34H29N2O2ClPRu (%): C, 59.97; H, 3.77; N, 6.36.Found: C, 60.05; H, 3.73; N, 6.39.

With the complex challenges of chemical substances, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a 40 mL scintillation vial equipped with a magnetic stir bar was added C848 (0.500 g, 0.589 mmol), ^-toluenesulfonyl chloride (0.056 g, 0.30 mmol), tetrahydrothiophene 1- oxide (0.307 g, 2.94 mmol), and dichloromethane (4 mL). The reaction was stirred at ambient temperature for one hour then diluted with diethyl ether (25 mL). The precipitate was isolated by filtration, washed with diethyl ether (2 x 10 mL) followed by hexanes (1 x 15 mL) then dried in vacuum to afford C673 (0.248 g, 62.6% yield). [000131] 1H MR (400 MHz, CDCh) delta 16.12 (s, 1H), 7.82 (d, J = 7.7 Hz, 2H), 7.55 (t, J = 7.2 Hz, 1H), 7.23 (t, J = 7.7 Hz, 2H), 7.11 (br s, 2H), 6.93 (s, 1H), 6.29 (s, 1H), 4.11 – 3.94 (m, 3H), 3.86 – 3.76 (m, 1H), 2.72 (s, 3H), 2.69 (s, 3H), 2.64 (s, 3H), 2.62 – 2.45 (m, 3H), 2.35 (s, 3H), 2.27 – 2.17 (m, 1H), 2.15 (s, 3H), 2.07 (s, 3H), 2.05 – 1.91 (m, 2H), 1.84 – 1.68 (m, 2H)., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MATERIA, INC.; JOHNS, Adam, M.; (112 pag.)WO2018/38928; (2018); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II), and cas is 15529-49-4, its synthesis route is as follows.,15529-49-4

General procedure: Diphosphine ligand (2.0 mmol) was dissolved in 10 mL of dichloromethane and the solution was added dropwise to a stirred solution of RuCl2(PPh3)3 (1.0 mmol) in 10 mL of dichloromethane. The reaction mixture was stirred approximately for 50 min at room temperature. The brown solution was filtered to remove the insoluble impurities. The solvent was reduced by a vacuum and the product was then precipitated by adding n-hexane. The yellow solid was filtered and washed three times with 20 mL of diethyl ether.

15529-49-4 is used more and more widely, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Article; Al-Noaimi, Mousa; Warad, Ismail; Abdel-Rahman, Obadah S.; Awwadi, Firas F.; Haddad, Salim F.; Hadda, Taibi B.; Polyhedron; vol. 62; (2013); p. 110 – 119;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

(PPh3)3RuCI2 (1 eq., 0.575 g, 0.6 mmol) and 1-naphtyl-1-phenyl-prop-2-yn-1-ol (compound B, 1.5 eq., 0.23 g, 0.9 mmol) were added in 4 ml HCI/dioxane solution (0.15 mol/l). The solution was heated to 90C for 3 hour, after which the solvent was removed under vacuum. Hexane (20 ml) was added to the flask and the solid was ultrasonically removed from the wall. The resulting suspension was filtered and washed two times using hexane (5 ml). The remaining solvent was evaporated affording a red-brown powder; 0.51 g (Yield: 90 %). The product was characterized by NMR spectra 31P.31P NMR (121.49 MHz, CDCI3): 628.75.

15529-49-4 is used more and more widely, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Patent; GUANG MING INNOVATION COMPANY (WUHAN); W.C. VERPOORT, Francis; YU, Baoyi; WO2014/108071; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,246047-72-3

Example 1Synthesis of Ru complex 4a (H2IMes)(PCy3)Cl2Ru=CHPh (formula lb, 860mg, l .Ommol) and CuCl (270 mg, 2.5mmol, 2.5 eq) were added into a 100 mL of two-neck round-bottom flask filled with inert gas (Ar), and followed by adding DCM (15 mL) and ligand 3a (250 mg, 1.2mmol, 1.2 eq) into the DCM solution at 20-25C. The reaction was stirred until completed in 30-60 min. (monitored by TLC). The reaction mixture was filtered and concentrated, then purified by flash column eluting with a gradient solvent (Pentane/DCM 2/1 to DCM). The purified solid product was washed with methanol, and dried under vacuum to obtain 27mg of green solid product 4a, yield: 4%. The green product was confirmed by 1HNMR. Ru complex (4a) 1HNMR (400 MHz, CDC13): delta 19.09 (s, lH, Ru=CH),7.51-6.70 (m, 13H), 5.31 (m, 1H), 4.30 (d, J = 12.9 Hz, 1H), 4.04 (s, 4H, NCH2CH2N), 3.61 (d, J= 12.9 Hz, 1H), 2.45 (s, 12H), 2.33 (s, 6H).; Example 9 Synthesis of Ru complex 4j The synthetic procedure is the same as in Example 1 in 1.0 mmol scale. 353 mg of green solid product 4j was obtained (yield: 48%). Ru complex (4j) 1H- MR (400 MHz, CDC13): delta 18.88 (s, lH, Ru=CH), 7.57-6.44 (m, 11H), 5.36 (t, J = 13.2 Hz, 1H), 4.16-4.02 (m, 5H), 4.01 (d, J = 13.2 Hz, 1H), 2.75-2.00 (m, 19H), 1.01-0.90 (m, 6H).

246047-72-3 is used more and more widely, we look forward to future research findings about (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

Reference£º
Patent; ZANNAN SCITECH CO., LTD.; ZHAN, James Zheng-Yun; WO2011/79439; (2011); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Dichlorotris(triphenylphosphino)ruthenium (II), cas is 15529-49-4, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,15529-49-4

Compound 6 (604.4 mg, 1.0 mmol) and degassed morpholine (20 mL) were placed in a 100-mL Young-Schlenk container substituted with argon gas. Thereafter, the Young-Schlenk container was placed in an oil bath, and heated to 120 C. while stirring the components in the Young-Schlenk container, thereby causing a reaction. The progress of the reaction was confirmed by TLC, and the heating was stopped after two hours. Subsequently, the morpholine in the reaction mixture restored to room temperature (25 C.) was removed after collection with a liquid nitrogen trap under reduced pressure (0.1 to 2 mmHg). At this time, the reaction mixture was sufficiently stirred, and the Young-Schlenk container was immersed in water at room temperature (25 C.) to prevent cooling of the Young-Schlenk container by the heat of vaporization. (0217) After sufficiently removing the morpholine, dichlorotris(triphenylphosphino)ruthenium (II) (958.8 mg, 1.0 mmol) and dehydrated toluene (20 mL) were added while introducing argon gas into the container, and the mixture was heated to 110 C. using an oil bath, thereby causing a reaction. The heating was stopped after three hours, and the reaction mixture was restored to room temperature (25 C.). (0218) Subsequently, dehydrated hexane (40 mL) was added to the reaction mixture in an argon gas atmosphere. Thereafter, the whole mixture, including the hexane layer and the toluene layer, in the Young-Schlenk container was stirred and completely mixed. After leaving the mixture unattended for 15 minutes, the generated purple substance was filtered out in an argon atmosphere while being washed with dehydrated diethylether, thereby obtaining a crude product. (0219) Subsequently, the resulting crude product was subjected to column chromatography (developing solvent: chloroform/ethyl acetate=5/1) in which silica gels were accumulated to about 10 cm, thereby removing a compound with high polarity. The effluent was collected to a flask and the collection was continued until the color of the purple liquid was slightly diluted. After this operation, the solution collected in the recovery flask was rapidly concentrated by an evaporator, thereby obtaining 435.1 mg (0.58 mmol, 58%) of substantially pure Compound 2c (RUPCY2) as a purple substance. (0220) The spectral data of Compound 2c (RUPCY2) is shown below. (0221) 1H NMR (500 MHz, CDCl3): delta 7.86 (d, 2H, J=7.4 Hz, C10H6N2), 7.66 (t, 2H, J=7.5 Hz, C10H6N2), 7.56 (d, 2H, J=7.5 Hz, C10H6N2), 3.87 (d, 4H, J=8.1 Hz, PCH2), 2.41 (br, 4H, C6H11), 2.18 (d, 4H, J=12.1 Hz, C6H11), 2.05 (d, 4H, J=10.9 Hz, C6H11), 1.54-1.81 (m, 20H, C6H11), 1.20-1.34 (m, 20H, C6H11). 13C NMR (150 MHz, CDCl3): delta 163.3, 158.3, 134.1, 122.0, 119.9, 40.5 (d, 1JPC=13.0 Hz), 36.3, 30.3, 29.4, 27.7, 27.5, 26.4. 31P{1H} NMR (241 MHz, CDCl3): delta 54.1. HRMS (ESI, (M-Cl)+) Calcd for C36H54ClN2P2Ru+: 713.2494. Found m/z=713.2476. (0222) FIG. 1 shows a result of X-ray single crystal structural analysis (Oak Ridge Thermal Ellipsoid Plot) of Compound 2c.

15529-49-4 is used more and more widely, we look forward to future research findings about Dichlorotris(triphenylphosphino)ruthenium (II)

Reference£º
Patent; National University Corporation Nagoya University; Saito, Susumu; Noyori, Ryoji; Miura, Takashi; Naruto, Masayuki; Iida, Kazuki; Takada, Yuki; Toda, Katsuaki; Nimura, Sota; Agrawal, Santosh; Lee, Sunkook; (42 pag.)US9463451; (2016); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

After a 50 mL two-necked flask was replaced with argon, the ligands 3bx (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to produce sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4bx as a green solid, yield: 65%.

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

To a solution of [Ru(PPh3)3Cl2] (868?mg, 2.0?mmol) in THF (10?mL) was added a solution of N,O-LH-NO2 (972?mg, 2.0?mmol) and Et3N (404?mg, 4.0?mmol) in EtOH (5?mL), and then the mixture was heated at 90?C with stirring overnight, during which there was a color change from brown to green. After removal of solvents in vacuo, the residue was extracted with CH2Cl2 (5?mL?*?2) and the solution was filtered. The clearly green filtrate was layered with Et2O (20?mL) at room temperature, and dark green block-shaped crystals of trans-[RuCl(PPh3)(kappa2-N,O-L-NO2)2]¡¤Et2O (2) were obtained in three days. Yield: 1356?mg, 71% (based on Ru).

15529-49-4, As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI