Day: September 22, 2020

A common heterocyclic compound, the ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II),cas is 15529-49-4, mainly used in chemical industry, its synthesis route is as follows.,15529-49-4

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru).

As the rapid development of chemical substances, we look forward to future research findings about 15529-49-4

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium, cas is 246047-72-3, it is a common heterocyclic compound, the ruthenium-catalysts compound, its synthesis route is as follows.,246047-72-3

Example 3 SYNTHESIS OF THE COMPLEX 3 ACCORDING TO THE INVENTION [0078] The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (63 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40 C. for 5 hours. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol. %). After evaporating the solvents, the complex 3 was obtained as a green solid (140 mg, 72% yield). [0079] 1H NMR (500 MHz, CD2Cl2) delta ppm: 15.85 (s, 1H), 7.07 (s, 1H), 7.00-6.96 (m, 3H), 6.66 (d, J=8.4 Hz, 1H), 6.44 (dd, J=7.7, 1.4 Hz, 1H), 6.24 (s, 1H), 6.20 (t, J=7.2 Hz, 1H), 4.01-3.96 (m, 1H), 3.83-3.70 (m, 2H), 3.64-3.59 (m, 1H), 2.63 (s, 3H), 2.54 (s, 3H), 2.50 (s, 3H), 2.35 (s, 3H), 2.27 (s, 3H), 1.66-1.50 (m, 13H), 1.29 (s, 3H), 1.11-0.70 (m, 20H). 13C NMR: (125 MHz, CD2Cl2) delta ppm: 281.36, 222.21, 221.66, 180.31, 148.30, 139.54, 139.17, 138.78, 137.63, 137.32, 136.98, 134.69, 130.23, 130.05, 129.70, 129.00, 122.38, 116.17, 111.26, 32.52, 32.39, 29.45, 28.92, 28.23, 28.15, 28.12, 28.04, 27.34, 27.03, 21.33, 21.14, 19.40, 18.92, 18.66, 16.76. 31P NMR (124.5 MHz, CDCl3) delta ppm: 29.11.

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; Skowerski, Krzysztof; Bieniek, Michal; US2015/158896; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is Dichlorotris(triphenylphosphino)ruthenium (II),cas is 15529-49-4, mainly used in chemical industry, its synthesis route is as follows.,15529-49-4

RuCl2(PPh3)3 (1 g, 1 .04 mmol) and the ligand of formula (IVg) (obtained from Example 1 ) (231 .4 mg, 1 .1 mmol) were placed in a 25 mL Schlenk tube under argon atmosphere, and dissolved in dry diglyme (2 mL). The reaction mixture was heated to 165C for 2 h, allowed to cool down to room temperature and stored at -18C to precipitate further overnight. Cold Et2O (2 mL) was added while cooling with a dry ice//so-propa- nol bath. The precipitate was filtrated by cannula, and washed with Et2O (5 times 2 mL). The orange powder was dried in vacuo, affording 530 mg (79%) of Ru(6-MeNN- SEt)(PP i3)Cl2 as an orange powder. An equilibrium of two conformations of Ru(6- MeNNSEt)(PPh3)Cl2 are existent in solution, delivering a doubled set of signals in NMR. For 1H-NMR only data of the major conformation is given due to overlapping signals. 1H-NMR (300 MHz, CD2CI2): delta 7.67-7.16 (m, 17H, CHarom), 7.01 (d, 1 H, J = 7.8, CHarom), 5.65 (m, 2H), 4.47 (m, 1 H), 3.5 (m, 1 H), 3.34 (m, 1 H), 3.22 (d, 1 H, J = 1 1 .1 ), 2.98 (m, 1 H), 2.59 (m, 1 H), 1 .53 (m, 2H), 0.87 (t, 3H, J = 7.5) ppm. 31P-NMR (122 MHz, CD2CI2): delta 48.8, 45.8 ppm. HRMS (ESI+): calculated for C29H32CI2N2PRUS (M+H): 644.0518; found 644.0518 (M+H), 667.0412 (M+Na)

As the rapid development of chemical substances, we look forward to future research findings about 15529-49-4

Reference£º
Patent; DSM IP ASSETS B.V.; BELLER, Matthias; BONRATH, Werner; DE VRIES, Johannes, Gerardus; FAN, Yuting; HUeBNER, Sandra; LEFORT, Laurent; MEDLOCK, Jonathan, Alan; PUYLAERT, Pim; VAN HECK, Richard; (65 pag.)WO2017/194662; (2017); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

In order to confirm by a series of compounds obtained by reaction of, reference the known method for the synthesis of beta, beta-di fluorophenyl ethylene. Furthermore, the known method of the reference (valeant literature 3, the following formula) synthesis of the (1,3-II Yl -4,5- dihydro imidazole -2-type methylene) (three ring hexyl phosphine ) methylene dichloride difluoromethane ruthenium. The following shows the results of these evaluations. These as spectrum standard, because of the above-mentioned of the internal liquid of the (mixture) is consistent with the NMR spectrum, so that the beta, beta-difluoro styrene and (1,3-II Yl -4,5- dihydro imidazole -2-type methylene) (three ring hexyl phosphine ) difluoro methylene b chlorize the generating., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Asahi Glass Co., Ltd.; YUSUKE, TAKAHIRA; (43 pag.)CN105517982; (2016); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Diphosphine ligand (2.0 mmol) was dissolved in 10 mL of dichloromethane and the solution was added dropwise to a stirred solution of RuCl2(PPh3)3 (1.0 mmol) in 10 mL of dichloromethane. The reaction mixture was stirred approximately for 50 min at room temperature. The brown solution was filtered to remove the insoluble impurities. The solvent was reduced by a vacuum and the product was then precipitated by adding n-hexane. The yellow solid was filtered and washed three times with 20 mL of diethyl ether.

15529-49-4, As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Article; Al-Noaimi, Mousa; Warad, Ismail; Abdel-Rahman, Obadah S.; Awwadi, Firas F.; Haddad, Salim F.; Hadda, Taibi B.; Polyhedron; vol. 62; (2013); p. 110 – 119;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru).

15529-49-4, 15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

1-(isopropylsulfanyl)-2-vinylbenzene (25.0 mg, 0.14 mmol), cuprous chloride (16.7 mg, 0.17 mmol) and (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium (119 mg, 0.14 mmol) were dissolved in 6 mL dichloromethane in a 10 mL round-bottomed flask under dry nitrogen topped with a reflux condenser. The reaction mixture was refluxed for 4.5 h. The resulting mixture was evaporated to dryness. The crude product was purified by chromatography on silica gel using 7:3 n-hexane and acetone as eluent to give a teal solid (48.0 mg, 55%). Two additional byproducts were separated by chromatography, but only one was fully characterized by NMR analysis: the trans-catalyst isomer green solid (8.1 mg, 9%) and additional green solid (14.2 mg). Both spontaneously converted with time to product 1A according to NMR analysis. Crystals suitable for X-ray analysis were obtained by laying hexanes over a solution of 1A in dichloromethane for few days at -18 C. [0056] 1H NMR (500 MHz, CD2Cl2): delta 0.76 (d, J=6.5 Hz, 3H), 1.41 (d, J=7.4 Hz, 3H), 1.56 (s, 3H), 2.16 (s, 3H), 2.37 (s, 3H), 2.44 (s, 3H), 2.57 (s, 3H), 2.64 (s, 3H), 3.58 (m, 1H), 3.80 (m, 1H), 3.88 (m, 1H), 4.00 (m, 1H), 4.11 (m, 1H), 5.96 (bs, 1H), 6.79 (d, J=7.5 Hz, 1H), 6.88 (bs, 1H), 7.04 (bs, 1H), 7.12 (bs, 1H), 7.17 (t, J=6.4 Hz, 1H), 7.46 (m, 2H), 17.14 (s, 1H) ppm. 13C NMR (125 MHz, CDCl3): delta 17.7, 18.7, 19.7, 20.3, 20.9, 21.0, 21.3, 24.2, 39.0, 51.4, 51.6, 123.7, 128.6, 129.4, 129.6, 129.7, 129.8, 130.7, 131.7, 135.0, 135.4, 135.6, 137.3, 137.7, 138.5, 140.3, 140.4, 156.6, 213.6, 285.6 ppm. APCI-MS m/z (M-Cl)+: 607.1 (Calc. 607.15).

246047-72-3, As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Patent; LEMCOFF, N. Gabriel; BEN-ASULY, Amos; US2014/155511; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 5 – Synthesis of the complex 4 according to the invention The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (78 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40C for 1 hour. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol.%). After evaporating the solvents, the complex 4 was obtained as a brown solid (104 mg, 50% yield). 4 H NMR (500 MHz, CD2CI2) delta ppm: 16.42 (s, 1H), 8.00 (dd, J = 9.3, 2.7 Hz, 1H), 7.53 (d, J = 2.1 Hz, 1H), 7.12 (s, 1H), 7.06 (s, 2H), 6.69 (d, J = 9.3 Hz, 1H), 6.22 (s, 1H), 4.07- 4.03 (m, 1H), 3.88-3.77 (m, 2H), 3.73-3.67 (m, 1H) , 2.64 (s, 3H), 2.56 (s, 3H), 2.51 (s, 3H), 2.39 (s, 3H), 2.27 (s, 3H), 1.64-1.50 (m, 13H), 1.46 (m, 3H), 1.12-0.75 (m, 20H). 13C NMR: (125 MHz, CD2CI2) delta ppm: 282.23 (d), 220.27, 219.73, 184.63 (d), 145.82, 139.23 (d), 139.08, 138.89, 137.46, 136.76, 136.69, 134.24, 134.00, 130.55, 130.36, 129.41 (d), 125.78, 117.59, 115.27, 52.14 (d), 51.63 (d), 34.52, 32.77, 32.64, 29.40, 28.91, 28.00 (m), 26.90 (d), 22.73, 21.34, 21.01, 19.41, 18.63, 18.53, 17.10, 14.21.

246047-72-3, As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Patent; APEIRON SYNTHESIS S.A.; SKOWERSKI, Krzysztof; BIENIEK, Micha?; WO2014/16422; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

Under an argon atmosphere a carbene complex of formula 5.II, wherein L represents a NHC ligand of formula 6a.II (153 mg, 0.18 mmol),and anhydrous CuCl (18 mg, 0.18 mmol) were placed in a Schlenck tube. Then dry, deoxygenated CH2C12 (10 ml) was added followed by a solution of compound 2.1 (38 mg, 0.18 mmol) in CH2C12 (4 ml). The resulting suspension was stirred at 30C for 1 h, thereafter it was concentrated in vacuum, and purified by silica-gel column chromatography (cyclohexane / EtOAc 5:2). After removal of solvent and washing with small amount of dry n-pentane complex 1.II, wherein Mes has the meaning of a mesityl group, was obtained as green, microcrystalline solid (100 mg, 83% of yield). Rf = 0.30 (hexane/EtOAc8:2);XH-NMR (500 MHz, CD2Cl2): delta[ppm]= 16.42 (s, 1H), 8.46 (dd, 1H, J = 9.1, 2.5 Hz), 7.80 (d, 1H, J = 2.5 Hz), 7.10 (s, 4H), 6:94 (d, 1H, J = 9.1 Hz), 5.01 (sept, 1H, J = 6.1 Hz), 4.22 (s, 4H), 2.47 (2s, 18H), 1.30 (d, 6H, J = 6.1 Hz); 13C-NMR (125 MHz, CD2Cl2): delta;[ppm]= 289.1, 208.2,156.8, 150.3, 145.0, 143.5, 139.6,139.3,129.8, 124.5,117.2,113.3, 78.2, 52.0, 21.3, 21.2,19.4; IR (KBr): nu [cm-1] = 2924, 2850,1606,1521,1480,1262, 1093, 918,745; MS (ESI): m/z 636 [M-CI]+; HRMS(EI): m/z calculated for C31H37N3O3Ru: [M+.] 671.1255, found 671.1229; Elemental analysis, calculated: (%) for C31H37N3O3Ru (671.63): C 55.44, H 5.55, N 6.26; found: C 55.35; H 5.70, N 6.09., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru).

15529-49-4, The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI