Day: September 18, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

General procedure: A methanol (10ml) solution containing the appropriate N-S pro-ligand and triethylamine was refluxed under argon for 15min and then the complex [RuCl2(PPh3)3] was added. The resulting brown suspension was refluxed for 3h, to afford a yellow suspension. After cooling, the yellow solid was collected by filtration, washed with methanol (3¡Á5ml), and dried under reduced pressure. 2.6.1 [Ru(mctz)2(PPh3)2] (1) Hmctz (0.019 g – 1.8 * 10-4 mol); NEt3 (26 mul – 1.8 * 10-4 mol), and [RuCl2(PPh3)3] (0.085 g – 8.9 * 10-5 mol). Yield: 50 mg – 65.8%. 31P{1H} NMR (81 MHz, CDCl3) 53.5 ppm (s). 1H NMR (200 MHz, CDCl3), delta/ppm: 7.4-7.0 (m, 30H Ph – PPh3); 3.4-2.5 (m (br), 8HCH2-mctz-). Anal. exp. (calc. for C42H38N2P2RuS4) C, 58.0 (58.5); H, 4.4 (4.4); N, 3.2 (3.2); S, 14.6 (14.9). Suitable single crystals were obtained by slow evaporation of a dichloromethane solution.

15529-49-4, The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Appelt, Patricia; Fagundes, Francisco D.; Facchin, Gianella; Gabriela Kramer; Back, Davi F.; Cunha, Mario A.A.; Sandrino, Bianca; Wohnrath, Karen; De Araujo, Marcio P.; Inorganica Chimica Acta; vol. 436; (2015); p. 152 – 158;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,cas is 246047-72-3, mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

Complex 1(2.0 grams) was dissolved in toluene (10 mL), and 4-phenylpyridine (1.50 grams, 4 mol equivalents) was added. The reaction flask was purged with argon and the reaction mixture was stirred for approximately 12 hours at about 20 C. to about 25 C. during which time a color change from dark purple to dark green was observed. The reaction mixture was transferred into 75 mL of cold (about 0 C.) pentane, and a dark green solid precipitated. The precipitate was filtered, washed with 4¡Á20 mL of cold pentane, and dried under vacuum to afford (IMesH2)(C11H9N)2(Cl)2RuCHPh 13 as a dark green powder (2.0 grams, 97% yield). 1H NMR (500 MHz, CD2Cl2): delta19.23 (s, 1H, CHPh), 8.74 (br. s, 2H, pyridine), 7.91 (br. s, 2H, pyridine), 7.70-7.08 (multiple peaks, 19H, ortho CH, para CH, meta CH, pyridine), 6.93 (br. S, 2H, Mes CH) 6.79 (br. s, 2H, Mes CH), 4.05 (br. s, 4H, NCH2CH2N), 2.62-2.29 (multiple peaks, 18H, Mes CH3).

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; Grubbs, Robert H.; Morgan, John P.; Love, Jennifer A.; Trnka, Tina M.; US2003/236427; (2003); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

General procedure: To a Schlenk flask charged with Grubbs? catalyst 2 (0.42 g,0.50 mmol) and CuCl (0.05 g, 0.50 mmol), compound 14 (or 15, 16)(0.6 mmol) in 10 mL dry dichloromethane was added at room temperature under N2. The resulting mixture was stirred for 40 min at 40 C. After being cooled to room temperature, the reaction mixturewas filtered and the clear filtrate was collected. The solvent from the filtrate was evaporated under vacuum to give a residue. The residue was purified by silica gel chromatography (CH2Cl2:ethyl acetate 2:1 or pentanes: ethyl acetate 3:2 or 1:1) to givethe desired product as a green crystalline solid.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhang, Yiran; Shao, Mingbo; Zhang, Huizhu; Li, Yuqing; Liu, Dongyu; Cheng, Yu; Liu, Guiyan; Wang, Jianhui; Journal of Organometallic Chemistry; vol. 756; (2014); p. 1 – 9;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

The complex RuCl2(PPh3)3 (4) (0.150 g, 0.156 mmol) suspended in 2 ml of distilled toluene, was reacted with HCNN-H (1) (36 mg, 0.174 mmol) and triethylamine (0.22 ml, 0.158 mmol). After stirring the mixture for 2 hours at 110 ?C the solution volume was reduced to about half and the complex was precipitated by adding 2 ml of pentane. The solid obtained was filtered off, washed with pentane (3 x 5 ml) and dried under reduced pressure. Yield 100 mg (74%). Elemental analysis (%) calculated for C50H41ClN2P2Ru. C, 69.16; H, 4.76; N, 3.23. Found: C, 69.35; H, 4.85; N, 3.34. 31P{1H} NMR (81.0 MHz, CD2Cl2, 20 C, H3PO4): delta 56.5 (d, J(PP) = 33.4 Hz), 50.5 (d, J(PP)= 33.4 Hz).

15529-49-4, 15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Universita’ Degli Studi di Udine; RIGO, Pierluigi; BARATTA, Walter; SIEGA, Katia; CHELUCCI, Giorgio Adolfo; BALLICO, Maurizio; MAGNOLIA, Santo; EP2178843; (2013); B1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Synthesis of the new ruthenium promoters 4 and 10 was carried out in this work. For the synthesis of complex 4 a THF solution of the thalium salt of the Schiff base ligand [20] was added the equivalent amount of Cl2Ru(PPh3)3 and the mixture stirred overnight at room temperature. After work-up [11b,20] the solid residue was dissolved in a minimal amount of toluene, reprecipitated with pentane, filtered off, briefly washed on the funnel with pentane and dried in vacuo to afford an orange-brown powder (78% yield) which was stored under inert atmosphere. 1H NMR (300 MHz, CDCl3): delta 2.36 [s, 3H, CH3]; 7.10-7.80 [m, 34H, aryl-CH]; 9.95 ppm (s, 1H, aldimine ligand).

15529-49-4, As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Article; Dragutan, Ileana; Ding, Fu; Sun, Ya-Guang; Verpoort, Francis; Dragutan, Valerian; Journal of Molecular Catalysis A: Chemical; vol. 386; (2014); p. 86 – 94;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

After a 50 mL two-necked flask was replaced by argon, the ligand 3 cu (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to give 4cu green solid product in a yield of 65%.

246047-72-3, 246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru). leff = 1.98 lB. IR (KBr disc, cm1):1599 (mCN), 1317 (mCAO), 1432, 1085 and 690 (mPPh3). MS (FAB):m/z 665 [M+], 630 [M+Cl], 403 [M+PPh3], 368 [Ru(salen-en)]+.Anal. Calc. for C34H29N2O2ClPRu (%): C, 59.97; H, 3.77; N, 6.36.Found: C, 60.05; H, 3.73; N, 6.39.

15529-49-4, The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Grubbs’ second generation catalyst (226 mg, 1 eq) and copper (I) chloride (26 mg, 1 eq) were charged in a Schlenk tube and degassed. A degassed solution of compound C4 (26 mg, 21 eq.) in anhydrous dichloromethane (50 mL) was transferred via cannula to the solid. The mixture was heated at 30 C. for 60 min. The solvent was removed in vacuo and the residue was purified by chromatography on silica gel (PE/EA) to afford compound C5 (202 mg) as a green solid in 100% yield. 31P NMR (CDCl3, 161.8 MHz) delta (ppm) 22.88 (s, 1P); HRMS (ES+): m/z=764 (M+H+)., 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Idenix Pharmaceuticals, Inc.; Parsy, Christophe Claude; Alexandre, Francois-Rene; Bonnaterre, Florence Marie-Emilie; Surleraux, Dominique; US9115095; (2015); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.,15529-49-4

EXAMPLE B2Preparation of [(Cl)2Ru(Pphenyl3) (ligand L2)], K2 272.5 mg (0.284 mmol) of dichlorotris(triphenylphosphine)ruthenium(II) and 160.0 mg (0.296 mmol) of ligand L2 are placed in a 10 ml Schlenk tube and admixed with 6.5 ml of dry toluene under argon. The dark suspension is stirred overnight at room temperature, resulting in a colour change to orange-red. After addition of 4 ml of dry pentane, the stirrer is switched off and the supernatant orange solution is filtered off with suction from the orange solid. The solid is washed five times with 4 ml each time of pentane and dried in a high vacuum. This gives 244 mg (88% of theory) of the title compound as an orange powder. 31P-NMR (C6D6, 121.5 MHz, ppm): 49.7 (d, J=40), 61.2 (d, J=40).

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Patent; Spindler, Felix; Nettekoven, Ulrike; Perseghini, Mauro; US2009/105481; (2009); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

After a 50 mL two-necked flask was purged with argon, the ligands 5 s (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was completed, silica gel was added to the filtrate to prepare a sand product. The crude product was obtained by silica gel column chromatography, and then washed with methanol or pentane-DCM to obtain a yellow-green solid product 6s in a yield of 37%., 246047-72-3

As the paragraph descriping shows that 246047-72-3 is playing an increasingly important role.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI