Day: September 11, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

Add 1a (0.600g, 3.44mmol) under nitrogen protection In a 100mL three-neck bottle, Additional tris(triphenylphosphine) ruthenium dichloride (2.50 g, 2.61 mmol) and 40.0 mL of tetrahydrofuran, Stir and dissolve, then add acetyl chloride (0.22 mL, 3.13 mmol). After the addition, the mixture was heated to 73 C (external temperature: 83 C), and the reaction was stirred for 3 hours to stop the reaction. The reaction solution was concentrated under reduced pressure at 40 C. Add isopropanol / petroleum ether (1.0 mL / 20.0 mL) and stir to precipitate a solid. Filter and wash with a small amount of petroleum ether. After drying, 2.10 g of red ruthenium complex product 2a (93%) was obtained., 15529-49-4

The synthetic route of 15529-49-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (19 pag.)CN109134547; (2019); A;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 2: (PPh3)zCI2Ru(3-/-propyl-inden-1-ylidene) (10B): ( h3)3RuCI2 (1 eq., 0.575 g, 0.6 mmol) and 1-( -propyl)-1-phenylprop-2-yn-1 -ol(compound 18A, 1.5 eq., 0.144 g, 0.9 mmol) were added in 4 ml HCI/dioxane solution (0.15 mol/l). The solution was heated to 90C for 3 hour, after which the solvent was removed under vacuum. Hexane (20 ml) was added to the flask and the solid was ultrasonically removed from the wall. The resulting suspension was filtered and washed two times using hexane (5 ml). The remaining solvent was evaporated affording a red-brown powder; 0.48 g (Yield: 93%). The product was characterized by NMR spectra 3 P. 3 P NMR (121.49 MHz, CDCI3): (529.55., 15529-49-4

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Patent; GUANG MING INNOVATION COMPANY (WUHAN); W.C. VERPOORT, Francis; (69 pag.)WO2016/242; (2016); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

A common heterocyclic compound, the ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,cas is 246047-72-3, mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

Grubbs second generation catalyst (100 mg, 0.117 mmol), 2-[(2,4,6-trimethylphenylimino)methyl]phenol (pKa: 8.84+/- 0.30) (0.117 mmol), silver (I) carbonate (16.27 mg, 0.058 mmol), and THF (2 ml) were reacted at room temperature during 2 h. The solvent was evaporated and crude reaction product purified on chromatography column to give an orange-brown complex. Yield 30%.

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Patent; Telene SAS; EP2151446; (2010); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a suspension of copper(I) chloride (13 mg, 0.12 mmol) and tricyclohexylphosphine[1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene][benzylidene]ruthenium(IV) dichloride (102 mg; 0.12 mmol) in 2 ml of dichloromethane was added a solution of the appropriate styrene derivative (0.132 mmol) dissolved in 3 ml of dichloromethane. After stirring at 40 C. for 20 min, the reaction solution was concentrated under reduced pressure. The residue was taken up in 20 ml of ethyl acetate and filtered through a Pasteur pipette with silica gel. The filtrate was concentrated again under reduced pressure and the residue was washed with a very small amount of ethyl acetate and cold pentane., 246047-72-3

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Patent; Kadyrov, Renat; Szadkowska, Anna; Grela, Karol; Barbasiewicz, Michal; US2008/275247; (2008); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The ruthenium-catalysts compound, name is (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,cas is 246047-72-3, mainly used in chemical industry, its synthesis route is as follows.,246047-72-3

Grubbs second generation catalyst (100 mg, 0.118 mmol) andacrylonitrile (25 mg, 0.472 mmol) were stirred in toluene (5 mL) for15 h at room temperature. After removal of volatiles by evacuation,the brown powder was washed with pentane (3 ¡Á 5 mL) and driedunder vacuum, affording 7-CN as a brown solid in a 80% yield

As the rapid development of chemical substances, we look forward to future research findings about 246047-72-3

Reference£º
Article; Vancompernolle, Tom; Vignon, Paul; Trivelli, Xavier; Mortreux, Andre; Gauvin, Regis M.; Catalysis Communications; vol. 77; (2016); p. 75 – 78;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Grubbs second generation catalyst (100 mg, 0.117 mmol), 2-[(2,4,6-trimethylphenylimino)methyl]phenol (pKa: 8.84+/-0.30) (0.117 mmol), silver (I) carbonate (16.27 mg, 0.058 mmol), and THF (2 ml) were reacted at room temperature during 2 h. The solvent was evaporated and crude reaction product purified on chromatography column to give an orange-brown complex. Yield 30%.

246047-72-3, The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Telene S.A.S.; US2011/137043; (2011); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

General procedure: Synthesis of the ruthenium(II) Schiff base complexes (2a-d) was accomplished according to the following procedure: To a solution of Schiff base 1a-d in methanol was added dropwise a solution of NaOH in methanol and the reaction mixture was stirred for 2hat room temperature. The deprotonated ligand mixture was transferred by cannula to a 50-mL three-necked flask fitted with a reflux condenser containing the [RuCl2(PPh3)3] precursor, stirred mixture was refluxed for 4h. A yellow precipitate was then filtered and washed with methanol and ethyl ether and then dried in a vacuum.

15529-49-4, 15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various fields.

Reference£º
Article; Afonso, Maria Beatriz A.; Cruz, Thais R.; Silva, Yan F.; Pereira, Joao Clecio A.; Machado, Antonio E.H.; Goi, Beatriz E.; Lima-Neto, Benedito S.; Carvalho-Jr, Valdemiro P.; Journal of Organometallic Chemistry; vol. 851; (2017); p. 225 – 234;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

The ruthenium-catalysts compound, cas is 15529-49-4 name is Dichlorotris(triphenylphosphino)ruthenium (II), mainly used in chemical industry, its synthesis route is as follows.,15529-49-4

To a solution of ONS-LH (486mg, 2.0mmol) in THF (20mL) was added [Ru(PPh3)3Cl2] (868mg, 2.0mmol), which was then stirred under N2 for 15min. Triethylamine (Et3N) (202mg, 2.0mmol) was introduced, and the reaction mixture was stirred overnight at room temperature, during which the color of solution changed from brown to dark red brown. After removal of solvents in vacuo, CH2Cl2 (20mL) was added and the solution was filtered. The filtrate was concentrated and the residue was washed with Et2O (5mL¡Á2) and hexane (5mL¡Á2) to give the desired product. Recrystallization from MeOH/ Et2O (1:3) afforded dark red block crystals of 1¡¤0.5CH3OH¡¤2.75H2O suitable for X-ray diffraction in five days. Yield: 1.19g, 63% (based on Ru). IR (KBr disc, cm-1): 1597 (nuC=N), 1311 (nuC-O), 739 (nuC-S), 1432, 1087 and 691 (nuPPh3); 31P NMR (CDCl3, 162MHz): delta 16.4 (s, PPh3), 14.7 (s, PPh3) ppm. 1H NMR (CDCl3, 400MHz): delta 8.81 (s, 1H, CH=N), 7.98-7.31 (m, 4H, Ar-H), 7.23-7.06 (m, 4H, Ar-H), 6.75-7.01 (m, 30H, PPh3), 2.39 (s, 3H, SCH3) ppm. MS (FAB): m/z 903 [M+], 868 [M+-Cl], 641 [M+-PPh3], 379 [M+-2PPh3], 344 [Ru(ONS-L)]+. Anal. Calc. for C50H42NOP2ClSRu¡¤0.5(CH4O)¡¤2.75(H2O) (%): C, 64.74; H, 4.98; N, 1.48. Found: C, 64.67; H, 5.03; N, 1.43

With the rapid development of chemical substances, we look forward to future research findings about 15529-49-4

Reference£º
Article; Wang, Chang-Jiu; Lin, Hui; Chen, Xin; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 467; (2017); p. 198 – 203;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a round-bottomed flask with a stir bar was placed with [Ru(PPh3)3Cl2] (868 mg, 2.0 mmol) under the nitrogen. Pre-dried THF(10 mL) was added and the resulting mixture was stirred at room temperature. Then salen-enH2 (536 mg, 2.0 mmol) and a little excess of Et3N (252 mg, 2.5 mmol) in THF (5 mL) were added. The reaction mixture was stirred at room temperature overnight. After removal of solvents, CH2Cl2 (15 mL) was added and the solution was filtered through cilite. The filtrate was concentrated and the residue was washed with Et2O (5mL 2) and hexane (5 mL 2) to give the desired product. Recrystallization from CH2Cl2/Et2O (1:2) afforded green block-shaped crystals of [RuCl(PPh3)(salen)] (3) suitable for X-ray diffraction in three days. Yield: 1011 mg, 76% (based on Ru)., 15529-49-4

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Article; Tang, Li-Hua; Wu, Fule; Lin, Hui; Jia, Ai-Quan; Zhang, Qian-Feng; Inorganica Chimica Acta; vol. 477; (2018); p. 212 – 218;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

As a common heterocyclic compound, it belongs to ruthenium-catalysts compound, name is (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride, and cas is 301224-40-8, its synthesis route is as follows.,301224-40-8

General procedure: In a glove box, a flask was charged with Ru complex 4 or 5 and Ag salt 3. Anhydrous degassed CH2Cl2 was then added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off through a Celite layer and washed with anhydrous (2mL). The solution was diluted with anhydrous hexane (10mL) and remaining precipitated Ag salt was again filtered off. Evaporation of the solvents on a rotary vacuum evaporator (40C, 1h, 25kPa) and finally at oil pump vacuum (25C, 1h, 1kPa) gave the products 1 or 2.

With the complex challenges of chemical substances, we look forward to future research findings about 301224-40-8,belong ruthenium-catalysts compound

Reference£º
Article; Lipovska, Pavlina; Rathouska, Lucie; ?im?nek, Ond?ej; Ho?ek, Jan; Kola?ikova, Viola; Ryba?kova, Marketa; Cva?ka, Josef; Svoboda, Martin; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 191; (2016); p. 14 – 22;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI