Simple exploration of 50982-12-2

The synthetic route of 50982-12-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.50982-12-2,Dichloro(cycloocta-1,5-diene)ruthenium(II),as a common compound, the synthetic route is as follows.

General procedure: The following common procedure was followed for the synthesesof complexes 1-5: A mixture of the ligand (0.36 mmol) and Ru(1,5-cod)Cl2(0.36 mmol) was dissolved in dry ethanol (10 ml) and the resultingmixture was refluxed for 2 h. The reaction volume was concentratedto a third of its original volume and the suspension was keptat 4 C overnight to give brick red solid which was filtered off,washed with cold ethanol and then diethyl ether. The solid wasdissolved in chloroform and excess of n-hexane was added toinduce the precipitation of the brick red solid product.

The synthetic route of 50982-12-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Thangavel, Saravanan; Rajamanikandan, Ramar; Friedrich, Holger B.; Ilanchelian, Malaichamy; Omondi, Bernard; Polyhedron; vol. 107; (2016); p. 124 – 135;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

New learning discoveries about 20759-14-2

20759-14-2 Ruthenium(III) chloride hydrate 6093376, aruthenium-catalysts compound, is more and more widely used in various.

20759-14-2, Ruthenium(III) chloride hydrate is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(4) Preparation of trans-3’oxospiro[cyclohexane-1,1′(3’H)-isobenzofuran]-4-carboxylic acid A mixture of 4-hydroxymethylspiro[cyclohexane-1,1′(3’H)-isobenzofuran]-3’one (190 mg), chloroform (2.0 mL), acetonitrile (2.0 mL) and sodium phosphate buffer (pH6.5, 2.0 mL) was cooled to 0 C., to which sodium periodate (612 mg) and ruthenium(III) chloride n-hydrate (10 mg) were added and the mixture was stirred for 30 minutes. The reaction mixture was stirred together with 1N hydrochloric acid (2.0 mL) for 30 minutes and partitioned between water (50 mL) and ethyl acetate (50 mL). The organic layer was washed with saturated saline solution, dried over anhydrous Na2SO4 and then concentrated. The residue was purified by column chromatography on silica gel (chloroform/methanol=100/1) to give the subject compound (98.6 mg).

20759-14-2 Ruthenium(III) chloride hydrate 6093376, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; Fukami, Takehiro; Kanatani, Akio; Ishihara, Akane; Ishii, Yasuyuki; Takahashi, Toshiyuki; Haga, Yuji; Sakamoto, Toshihiro; Itoh, Takahiro; US2002/188124; (2002); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Some tips on 301224-40-8

The synthetic route of 301224-40-8 has been constantly updated, and we look forward to future research findings.

301224-40-8, (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Complex 16 (125 mg, 0.200 mmol, which was prepared from Hoveyda-Grubbs first generation catalyst 15according to literature procedure (31), was dissolved in THF (4 ml) and potassium 2,4,6-triphenylthiophenolate 2a (78mg 0.200 mmol) was added as a solid in small portions. Residual reactant was transferred into the reaction mixture asa solution/suspension in THF (1 ml). The mixture was stirred for 4 h before all volatiles were removed under reducedpressure. The solid green residue was extracted with toluene (4×1 ml), and the green solution filtered and dried in vacuumleaving a green solid 208 mg). 1H-NMR showed the presence of toluene that could not be removed in vacuum. Thereforethe target compound was treated repeatedly with DCM/pentane followed by drying in vacuum, reducing the mass to0.185 mg. The residual was dissolved in 0.5 mL CH2Cl2, and then pentane (10 ml) was slowly added, in such a way asto obtain two separate layers, which were allowed to diffuse slowly (one week) into each other at -32C. The dark greencrystals of 7a?CH2Cl2?C5H12 were isolated and washed three times with pentane (145 mg, yield = 67 %). 1H NMR(500.13 MHz, CD2Cl2): delta = 14.47 (s, 1 H, Ru=CH), 7.67-7.60 (m, 2 H), 7.58-7.51 (m, 2 H), 7.44-7.40 (m, 2 H), 7.36-7.29(m, 3 H), 7.27-7.21 (m, 1 H), 7.17 (br, 1H), 7.05 (t, J = 7.2 Hz, 1 H), 6.97 (br, 2H), 6.94 (s, 2H), 6.91-6.73 (m, 8 H), 6.59(dd, J = 7.6, 1.5 Hz, 1 H), 6.50 (d, J = 8.3, 1 H), 4.27 (sep, J = 6.1 Hz, 1H), 2.42 (s, 6H), 2.15 (s, 6H), 2.04 (s, 6H), 1.07(d, J = 6.1 Hz), 0.66 (d, J = 6.1 Hz). 13C{1H} NMR (150.90 MHz, CD2Cl): delta= 272.40, 176.26, 153.78, 149,54, 147,54,146,79, 145.14, 142.86, 141.82, 141.13, 138.99, 137.91, 137.49, 137.15, 136.64, 131.23, 130.29, 130.22, 129.65,129.39, 129,35, 129,28, 129.16, 129.05, 128.99, 128.84, 128.73, 128.58, 128.43, 128.31, 127.89, 127.68, 127.52,127.43, 127.26, 127.01, 126.89, 125.79, 125.66, 125.23, 122.58, 122.58, 121.94, 113.47, 76.26, 51.98, 21.65, 21.30,20.92, 19.60, 18.86. HRMS (DART), m/z: 928.26871 [M+H]+, calculated for C55H5437CIN2OS101Ru: 928.26717.

The synthetic route of 301224-40-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bergen Teknologioverf¡ãring AS; Jensen, Vidar Remi; Occhipinti, Giovanni; EP2826783; (2015); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Simple exploration of 20759-14-2

The synthetic route of 20759-14-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.20759-14-2,Ruthenium(III) chloride hydrate,as a common compound, the synthetic route is as follows.

EXAMPLE 1 Synthesis of (2,4-dimethylpentadienyl) (ethylcyclo-pentadienyl) Ruthenium and Heat Decomposition Properties Thereof 400 g of zinc was weighed into a four-necked flask. After purging the container with argon, 205 ml of 2,4-dimethyl-1,3-pentadiene was added thereto to give a suspension. Then a solution of 30 g of ruthenium trichloride n-hydrate (n: about 3) dissolved in 1000 ml of methanol was dropped thereinto at room temperature over 40 minutes. After the completion of the dropping, the mixture was stirred at room temperature for 30 minutes, then heated to 60 C. and stirred for additional 2 hours. The mixture was once cooled by allowing to stand and then 12 ml of ethylcyclopentadiene was added thereto. The resultant mixture was stirred as such at room temperature for 30 minutes, then heated to 60 C. and stirred for additional 2 hours. After the completion of the reaction, the mixture was cooled to room temperature and the unreacted zinc was removed with the use of a glass filter. Next, it was extracted with hexane (750 ml*1, 300 ml*4). The extracts were concentrated under reduced pressure and the oily product thus obtained was distilled under reduced pressure to thereby give 25.4 g of target (2,4-dimethylpentadienyl) (ethylcyclo-pentadienyl) ruthenium (yield: 76.3%). Oily yellow product: 1H-NMR (500 MHz, CDCl3, deltappm) 5.38 (s, 1H), 4.63 (t, J=2.0 Hz, 2H), 4.52(t, J=2.0 Hz, 2H), 2.70 (d, J=2.5 Hz, 2H), 2.15 (q, J=7.5 Hz, 2H), 1.93 (s, 6H), 1.12 (t, J=7.5 Hz, 3H), -0.09 (d, J=2.5 Hz, 2H) IR (neat, cm-1)

The synthetic route of 20759-14-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TOSOH CORPORATION; US2003/88116; (2003); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Analyzing the synthesis route of 301224-40-8

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

301224-40-8, (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of fluorinated acid silver salt 6 (2.2eq.) and dichlororuthenium(IV) complex 5 (1.0eq.) was first dried under vacuum (13Pa) at room temperature for 1h. Dry dichloromethane (5mL) was added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off and washed with dry dichloromethane (2mL). Evaporation of the solvent afforded the product 7-9.

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Article; Babun?k, Mario; ?im?nek, Ond?ej; Ho?ek, Jan; Ryba?kova, Marketa; Cva?ka, Josef; B?ezinova, Anna; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 161; (2014); p. 66 – 75;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Some tips on 50982-12-2

The synthetic route of 50982-12-2 has been constantly updated, and we look forward to future research findings.

50982-12-2, Dichloro(cycloocta-1,5-diene)ruthenium(II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Na2[7,10-nido-C2B10H12] was dissolved in degassed THF (45 mL) giving a purple solution. Excess Na was removed from the reduced carborane solution to give a colourless solution which was then transferred into a Schlenk tube containing [RuCl2(COD)]x (0.780 g, 2.78 mmol) and a large excess of naphthalene. The resulting brown mixture was heated at reflux for 90 min then allowed to cool to room temperature. The brown mixture was filtered through a short silica column eluting with DCM to afford a brown solution, removal of solvent from which yielded a brown solid. This was further purified by column chromatography (1:2 DCM:40-60 petroleum ether), giving a yellow band, followed by preparative TLC (2:1 DCM:40-60 petroleum ether, Rf 0.38) yielding solid. C12H20B10Ru requires C 38.59, H 5.40. Found: C 39.48, H 4.87%.

The synthetic route of 50982-12-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Scott, Greig; Ellis, David; Rosair, Georgina M.; Welch, Alan J.; Journal of Organometallic Chemistry; vol. 721-722; (2012); p. 78 – 84;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Simple exploration of 301224-40-8

The synthetic route of 301224-40-8 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,as a common compound, the synthetic route is as follows.

Hoveyda-Grubbs second generation catalyst H2 (104 mg, 0.16 mmol) and potassium 2,6-dimethylbenzenethiolate (34 mg, 0.19 mmol) 2b were transferred to a 25 mL Schlenk flask, followed by addition of 4 mL of toluene and 1 mL THF under argon. Then the mixture was stirred vigorously at 20 C. for 30 min. During this time the color of the mixture turned from light green to a slightly darker green. The reaction mixture was filtered, and the volume of the filtrate reduced to about 3 mL. Hexane (15 mL) was added to the filtrate to precipitate the product 4b as red/orange-brown micro-crystals (86.3 mg, 71%). (0121) Crystals for X-ray diffraction analysis (see FIG. 12 and Table 4) were prepared by dissolving a sample in a minimal amount of toluene, upon which a layer of hexane was added. Red-brown crystals were formed over a period of 3 days at room temperature. (0122) 1H NMR (400.13 MHz, CDCl3): delta=14.90 (s, 1H), 7.22 (m, 1H), 7.10 (s, 2H), 7.06 (s, 2H), 6.80-6.73 (m, 2H), 6.66 (t, J=7.2 Hz, 1H), 6.16 (d, J=8.0 Hz, 1H), 4.15 (m, 4H), 3.83 (sep, J=6.16 Hz, 1H), 2.62 (s, 6H), 2.54 (s, 6H), 2.42 (s, 6H), 2.32 (br s, 3H), 1.8 (d, J=5.6 Hz, 3H), 0.89 (d, J=6.4 Hz, 3H), 0.80 (br s, 3H). 13C NMR (100.6 MHz, CDCl3): delta=271.29, 211.87, 151.57, 145.12, 142.30 (br), 141.67, 139.25, 138.90, 138.75, 137.40 (br), 129.74, 129.43, 127.32, 126.61, 124.43, 123.12, 122.34, 114.19, 74.99, 52.15, 21.55, 21.45, 21.43, 20.07 (br). (0123) A corresponding ORTEP-style diagram of 4b is shown in FIG. 12. Selected geometrical parameters: Ru1-C9=1.846 , Ru1-S1=2.285 , Ru1-Cl1=2.364 , Ru1-O1=2.298 , Ru1-S1-C1=113.67, Cl1-Ru1-S1=150.75.

The synthetic route of 301224-40-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bergen Teknologioverforing AS; Jensen, Vidar R.; Occhipinti, Giovanni; Hansen, Frederick Rosberg; US8716488; (2014); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Analyzing the synthesis route of 301224-40-8

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

301224-40-8, (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a Schlenk flask the corresponding starting material (1 equiv)was dissolved in degassed CH2Cl2. 5,7-Dihalide-8-hydroxyquinoline(20 equiv) and Cs2CO3 (20 equiv) were added. Thereaction mixture was stirred under an atmosphere of argon for12 h at 25 C. Insoluble components were removed by filtrationover celite. Column chromatography (silica gel) using cyclohexane/ethylacetate = 10/1 (v/v) yielded the correspondingcomplexes. The synthesis of the following Ru-based complexesbelongs to a patent application [63].

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Article; Wappel, Julia; Fischer, Roland C.; Cavallo, Luigi; Slugovc, Christian; Poater, Albert; Beilstein Journal of Organic Chemistry; vol. 12; (2016); p. 154 – 165;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

New learning discoveries about 50982-12-2

50982-12-2 Dichloro(cycloocta-1,5-diene)ruthenium(II) 11000435, aruthenium-catalysts compound, is more and more widely used in various.

50982-12-2, Dichloro(cycloocta-1,5-diene)ruthenium(II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Next, 31.56 g of this (eta-1,5-cyclooctadiene)ruthenium(II) dichloride, 34.97 g of sodium carbonate, 28 mL of 2,4-pentanedione and 100 mL of N,N-dimethylformamide were placed in a nitrogen-flushed three-neck flask and stirred at 140 C. for 1 hour. Following reaction completion, the solution was cooled to room temperature, then alumina column chromatography (developing solvent: diethyl ether) was carried out. The resulting solution was concentrated, after which 120 mL of water was added and the solution was left at rest for 3 hours. The crystals that precipitated out were collected by filtration, and after being washed with water, were dried in vacuo. 46.53 g of bis(2,4-pentanedionato)(eta-1,5-cyclooctadiene)ruthenium(II) was obtained as an orangey-yellow solid. The yield was 94 wt %.

50982-12-2 Dichloro(cycloocta-1,5-diene)ruthenium(II) 11000435, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; JSR Corporation; US2012/282414; (2012); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Brief introduction of 301224-40-8

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.301224-40-8,(1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride,as a common compound, the synthetic route is as follows.

General procedure: In a glove box, a flask was charged with Ru complex 4 or 5 and Ag salt 3. Anhydrous degassed CH2Cl2 was then added and the resulting mixture was stirred at room temperature for 3h in the dark. The solids were filtered off through a Celite layer and washed with anhydrous (2mL). The solution was diluted with anhydrous hexane (10mL) and remaining precipitated Ag salt was again filtered off. Evaporation of the solvents on a rotary vacuum evaporator (40C, 1h, 25kPa) and finally at oil pump vacuum (25C, 1h, 1kPa) gave the products 1 or 2.

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Article; Lipovska, Pavlina; Rathouska, Lucie; ?im?nek, Ond?ej; Ho?ek, Jan; Kola?ikova, Viola; Ryba?kova, Marketa; Cva?ka, Josef; Svoboda, Martin; Kvi?ala, Jaroslav; Journal of Fluorine Chemistry; vol. 191; (2016); p. 14 – 22;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI