New learning discoveries about 15529-49-4

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Under argon dichlorotris(triphenylphosphine)ruthenium(II) (0.94 g, 0.99 mmol) is added to a solution of 2-(diphenylphosphino)-N-(2-(methylthio)benzyl)ethanamine (0.36 g, 0.99 mmol) in toluene (20 ml). After stirring for 19 h at 110 C. the reaction mixture is cooled to room temperature and evaporated under vacuo to a volume of 5 ml. To this suspension hexane (20 ml) is added. After stirring for 15 min the suspension is filtered and washed with hexane (4 ml) and diethyl ether (2¡Á4 ml). The light-brown filter cake is dried under vacuo for 19 h and then suspended in diethyl ether (5 ml). After stirring for 15 min the suspension is filtered, washed with diethyl ether (3¡Á1 ml) and the filter cake is dried u nder vacuo. Complex 9 is obtained as a light-brown solid (0.76 g, 96%). Analytical data: 1H-NMR (400 MHz, CDCl3): 7.80 (m, 6H), 7.69 (m, 1H), 7.47 (m, 3H), 7.31-7.01 (m, 17H), 6.88 (dt, J=2.02, 7.58, 1H), 7.18 (d, J=7.33, 1H), 5.48 (bs, 1H), 5.23 (d, J=12.63, 1H), 4.11 (m, 1H), 3.89 (m, 1H), 3.00 (m, 1H), 2.07 (m, 1H), 1.12 (m, 1H), 1.08 (s, 3H). 31P-NMR (500 MHz, CDCl3): 49.83 (d, J=27.74, 1P), 37.96 (d, J=27.74, 1P). Anal. calcd. for C40H39Cl2NP2RuS: C, 60.07%; H, 4.92%; N, 1.75%. Found: C, 60.36%; H, 4.79%; N, 1.47%.

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; GIVAUDAN SA; GEISSER, Roger Wilhelm; OETIKER, Juerg Daniel; SCHROeDER, Fridtjof; (17 pag.)US2016/326199; (2016); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

New learning discoveries about 246047-72-3

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 3 – Synthesis of the complex 3 according to the invention The commercially available complex G (200 mg, 0.24 mmol) was placed in a flask, to which methylene chloride was added (6 ml). This was followed by adding the compound of the formula: (63 mg, 0.47 mmol) and tricyclohexylphosphine (132 mg, 0.47 mmol). The resulting solution was stirred at a temperature of 40C for 5 hours. The reaction mixture was introduced at the top of a chromatographic column packed with silica gel (eluent: ethyl acetate/cyclohexane, 0 to 10 vol.%). After evaporating the solvents, the complex 3 was obtained as a green solid (140 mg, 72% yield). 3 H NMR (500 MHz, CD2Cl2) delta ppm: 15.85 (s, 1H), 7.07 (s, 1H), 7.00-6.96 (m, 3H), 6.66 (d, J = 8.4 Hz, 1H), 6.44 (dd, J = 7.7, 1.4 Hz, 1H), 6.24 (s, 1H), 6.20 (t, J = 7.2 Hz, 1H), 4.01-3.96 (m, 1H), 3.83-3.70 (m, 2H), 3.64-3.59 (m, 1H), 2.63 (s, 3H), 2.54 (s, 3H), 2.50 (s, 3H), 2.35 (s, 3H), 2.27 (s, 3H), 1.66-1.50 (m, 13H), 1.29 (s, 3H), 1.11-0.70 (m, 20H). 13C NMR: (125 MHz, CD2CI2) delta ppm: 281.36, 222.21, 221.66, 180.31, 148.30, 139.54, 139.17, 138.78, 137.63, 137.32, 136.98, 134.69, 130.23, 130.05, 129.70, 129.00, 122.38, 116.17, 111.26, 32.52, 32.39, 29.45, 28.92, 28.23, 28.15, 28.12, 28.04, 27.34, 27.03, 21.33, 21.14, 19.40, 18.92, 18.66, 16.76. 31P NMR (124.5 MHz, CDCI3) delta ppm: 29.11.

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; APEIRON SYNTHESIS S.A.; SKOWERSKI, Krzysztof; BIENIEK, Micha?; WO2014/16422; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Downstream synthetic route of 246047-72-3

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

To a dry 100 mL round-bottom flask containing a magnetic stirbar, under argon, was added 1.79 g (2.1 mmol, 1.0 equiv) [5], CuCl (521 mg, 5.28 mmol, 2.51 equiv), and 25 mL of anhydrous CH2Cl2. Ligand precursor [2] (403 mg, 2.1 mmol, 1.0 equiv) was added to the reddish solution in 20 mL of CH2Cl2 at room temperature. A reflux condenser was added and the mixture was heated for 70 minutes, under argon. The crude product was concentrated and loaded onto silica gel and eluted with 2:1 pentane:CH2Cl2 then 1:1 pentane:CH2Cl2 to remove a dark green band. The column was washed with CH2Cl2, then Et2O. The green and yellow bands were combined and concentrated under reduced pressure to yield a dark green solid. The solvents are removed under reduced pressure and the solid was crystallized from hexane to yield 1.07 g (1.70 mmol, 85%) of [6]. 1H NMR (300 MHz, CDCl3) delta: 16.56 (s, 1H, Ru=CHAr), 7.48 (m, 1H, aromatic CH), 7.07 (s, 4H, mesityl aromatic CH), 6.93 (dd, J=7.4 Hz, 1.6 Hz, 1H, aromatic CH), 6.85 (dd, J=7.4 Hz, 1H, aromatic CH), 6.79 (d, J=8.6 Hz, 1H, aromatic CH) 4.90 (septet, J=6.3 Hz, 1H, (CH3)2CHOAr), 4.18 (s, 4H, N(CH2)2N), 2.48 (s, 12H, mesityl o-CH3), 2.40 (s, 6H, mesityl p-CH3), 1.27 (d, J=5.9 Hz, 6H, (CH3)2CHOAr. 13C NMR (75 MHz, CDCl3) delta: 296.8 (q, J=61.5 Hz), 211.1, 152.0, 145.1, 145.09, 138.61, 129.4 (d, JNC 3.9 Hz), 129.3, 129.2, 122.6, 122.1, 122.8, 74.9 (d, JOC 10.7 Hz), 51.4, 30.9, 25.9, 21.01.

246047-72-3 (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium 11147261, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; MATERIA, INC.; Pederson, Richard L.; Woertink, Jason K.; Haar, Christopher M.; Gindelberger, David E.; Schrodi, Yann; (13 pag.)US9504997; (2016); B2;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Simple exploration of 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.246047-72-3,(1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium,as a common compound, the synthetic route is as follows.

A 50 mL two-necked flask was purged with argon and then the ligand 7e (10 mmol), CuCl (30 mmol, 3 eq) and 30 mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with an argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain a green solid product 8e with a yield of 74%.

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

New learning discoveries about 15529-49-4

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

RuCl2 (PPh3) 3 (800 mg, 0.83mmol) and (1R, 2R) -1, 2-diphenylethylenediamine (195 mg, 0.92 mmol) are weighed and charged into a 20-mL Schlenk flask. The flask was reduced pressure to degas therein and then nitrogen gas was introduced into the flask. Dichloromethane (8 mL) was added thereto through a syringe, and the mixture was stirred under nitrogen atmosphere at room temperature for 3 hours. The reaction solution was then Celite-filtered, and the Celite layer was washed with dichloromethane (2mL). The filtrate obtained was concentrated under reduced pressure to a volume of about 2 mL; hexane (16 mL) was added thereto; and the mixture was stirred at room temperature for 1 hour. The precipitate was collected by filtration under nitrogen atmosphere, and the powder obtained was dried under reduced pressure (1 mmHg), to give 531 mg of a desired product (yield: 70%).

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; Takasago International Corporation; EP1970360; (2008); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Some tips on 246047-72-3

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

246047-72-3, (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A 50 mL two-necked flask was purged with argon and the ligands 3cy (10mmol), CuCl (30mmol, 3eq) and 30mL of dry DCM were sequentially added and the mixture was purged three times with argon to protect the closed system with argon balloon. Ruthenium complex 1b (12 mmol) was added under argon atmosphere, and the reaction was carried out at room temperature for 0.5 hour. After the reaction was over, silica gel was added to the filtrate to produce sand after filtration. The crude product was obtained by silica gel column chromatography and then washed with methanol or pentane-DCM to obtain 4cy green solid product in a yield of 70%.

The synthetic route of 246047-72-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zannan Science And Technology (Shanghai) Co., Ltd.; Zhan Zhengyun; (102 pag.)CN104262403; (2017); B;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Downstream synthetic route of 15529-49-4

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

(PPh3)3RuCI2 (1 eq., 0.575 g, 0.6 mmol) and 1-t-butyl-1-phenyl-prop-2-yn-1-ol (compound B, 1.5 eq., 0.17 g, 0.9 mmol) were added in 4 ml HCI/dioxane solution (0.15 mol/l). The solution was heated to 90C for 3 hour, after which the solvent was removed under vacuum. Hexane (20 ml) was added to the flask and the solid was ultrasonically removed from the wall. The resulting suspension was filtered and washed two times using hexane (5 ml). The remaining solvent was evaporated affording a red-brown powder; 0.48 g (Yield: 92 %). The product was characterized by NMR spectra 31P.31P NMR (121.49 MHz, CDCI3): 628.76.Example 4: Synthesis of (PPh3)2CI2Ru(3-naphtyl-inden-1-ylidene)

15529-49-4 Dichlorotris(triphenylphosphino)ruthenium (II) 11007548, aruthenium-catalysts compound, is more and more widely used in various.

Reference£º
Patent; GUANG MING INNOVATION COMPANY (WUHAN); W.C. VERPOORT, Francis; YU, Baoyi; WO2014/108071; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Brief introduction of 15529-49-4

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15529-49-4,Dichlorotris(triphenylphosphino)ruthenium (II),as a common compound, the synthetic route is as follows.

Step 4: (PPh^2CI2Ru(3-2-methylphenyl-5-methylphenyl-inden-1 -ylidene) (1 D): (PPh3)3RuCl2 (1 eq., 0.575 g, 0.6 mmol) and 1 ,1 -bis-2-methylphenyl-prop-2-yn-1-ol (compound C, 1.5 eq., 0.213 g, 0.9 mmol) were added in 4 ml HCI/dioxane solution (0.15 mol/l). The solution was heated to 90C for 3 hour, after which the solvent was removed under vacuum. Hexane (20 ml) was added to the flask and the solid was ultrasonically removed from the wall. The resulting suspension was filtered and washed two times using hexane (5 ml). The remaining solvent was evaporated affording a red-brown powder; 0.52 g (Yield: 95 %). The product was characterized by NMR spectra H and 3 P. H NMR (300 MHz, CDCI3, TMS): delta 7.56 (dd, 1 1 H), 7.37 (t, 6 H), 7.21 -7.31 (m, 13 H), 7.09 (tetra, 3 H), 6.95 (t, 3 H), 6.47 (t, 1 H), 6.14 (s, 1 H), 2.20 (s, 3 H), 1 .66 (s, 3 H). 3 P NMR (121.49 MHz, CDCI3): delta 29.33.

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Patent; GUANG MING INNOVATION COMPANY (WUHAN); W.C. VERPOORT, Francis; (69 pag.)WO2016/242; (2016); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Analyzing the synthesis route of 301224-40-8

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

301224-40-8, (1,3-Dimesitylimidazolidin-2-ylidene)(2-isopropoxybenzylidene)ruthenium(VI) chloride is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A further example of a synthesis producing an NHC containing cis complex is shown below. [0088] HII (200 mg) and P(OiPr)3 (5 eq) were stirred in for 72 h. The crude 65 was recrystallised from DCM/pentane. [0089] 1H (400 MHz, 298K): 16.05 (d, 1H, J=35.3 Hz, C?CH), 10.24 (d, 1H, J=9.7 Hz, Ph-H), 6.87-6.83 (m, 2H, Ph-H), 6.78 (s, 1H, Ph-H), 6.61 (s, 1H, Ph-H), 6.19-6.16 (m, 2H, Ph-H), 4.67 (brs, 2H, PO-CH-CH3), 4.09-4.06 (m, 1H, Ph-O-CH-CH3), 4.04 (brs, 1H, PO-CH-CH3), 3.43-3.40 (m, 1H), 3.16-3.02 (m, 3H), 2.89 (s, 3H, Mes-CH3), 2.58 (s, 3H, CH3), 2.46 (s, 3H, CH3), 2.42 (s, 3H, CH3), 2.18 (s, 3H, CH3), 1.92 (s, 3H, CH3), 1.48-0.80 (m, 24H, PO-CH-CH3). [0090] 31P{1H} (121.49 MHz, 298K): 128.7 (s)

As the paragraph descriping shows that 301224-40-8 is playing an increasingly important role.

Reference£º
Patent; University Court of the University of St. Andrews; Cazin, Catherine; US2014/228563; (2014); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI

Analyzing the synthesis route of 15529-49-4

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

15529-49-4, Dichlorotris(triphenylphosphino)ruthenium (II) is a ruthenium-catalysts compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Under argon dichlorotris(triphenylphosphine)ruthenium(II) (0.53 g, 0.55 mmol) is added to a solution of 2-(diphenylphosphino)-N-(2-(methylthio)benzylidene)ethanamine (0.20 g, 0.55 mmol) in toluene (15 ml). After stirring for 20 h at 110 C. the reaction mixture is cooled to room temperature and evaporated under vacuo to a volume of 5 ml. To this red suspension hexane (20 ml) is added. After stirring for 15 min the suspension is filtered and washed with hexane (4 ml). The red filter cake is dried under vacuo for 19 h and then suspended in diethyl ether (6 ml). The suspension is filtered, washed with diethyl ether (4¡Á4 ml) and the filter cake is dried under vacuo. Complex 8 is obtained as a light-red solid (0.29 g, 67%). Analytical data: 1H-NMR (400 MHz, CDCl3): 8.78 (d, J=8.84, 1H), 8.33 (m, 1H), 7.70 (m, 3H), 7.54-7.06 (m, 25H), 4.59 (m, 1H), 4.53 (m, 1H), 2.55 (m, 2H), 1.83 (d, J=2.53, 3H). 31P-NMR (500 MHz, CDCl3): 40.62 (d, J=32.27, 1P), 36.72 (d, J=32.37, 1P). MS (ESI): 797.18 (62%, M+), 762.12 (100%, [M-Cl]+).

As the paragraph descriping shows that 15529-49-4 is playing an increasingly important role.

Reference£º
Patent; GIVAUDAN SA; GEISSER, Roger Wilhelm; OETIKER, Juerg Daniel; SCHROeDER, Fridtjof; (17 pag.)US2016/326199; (2016); A1;,
Highly efficient and robust molecular ruthenium catalysts for water oxidation
Catalysts | Special Issue : Ruthenium Catalysts – MDPI